Robot Building Questions
Your robot can be more than a simple automated machine with the power of ARC Pro!
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
I Make Robots Crew Socks
Exclusive to robot builders, these are a one-size-fits-all solution up to a men's size 12. The construction is 73%...
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
WebSocket server for ARC: accepts clients, stores messages, runs per-message scripts, tracks connection status, supports debug, needs Windows admin
Featured
Control a Brookstone Rover with EZ-B using ARC software: removable EZ-B pods, battery/speaker mounts, Lego platform, soldering and scripting.
question
Wired, Non-Battery, Power?
Is it possible to supply power without using the battery (for long term programming/debugging)?
3
2 k
CardboardHacke… |
question
Question With Ankle Servo
Hello I'm french, sorry for my poor english. I have a JD from 3 days and JD was assembled yesterday. It work fine once and now I have a problem with right foot. When I...
13
3 k
Stiko |
question
Ez-B V4 Power Question
I have read several threads and seen the diagram of the Cable to Connect the EZ-B to the Create 2, My question is, I would like to have it powered all of the time and not have it disconnect when charging, I'm sure i would need an inline voltage regulator so that it will not damage the EZ-B, What kind of Regulator has anyone used, and what is the...
2
2 k
alaverdure |
question
Using The Camera On A Surface 3
I recently got a fantastic deal on a Microsoft surface 3 (windows 8.1), and have been using it to make my AR Drone follow a little RC car around with ARC. I...
4
2 k
stikbob |
question
A Note On Ez-Ai/Rafiki
EZ-AI development is on hold right now, well kind of... We are in the process of working with some services that will allow the capabilities of EZ-AI to be far better than what...
210
26 k
Dave Schulpius |
question
Controlling Jd Revolution Humanoid
What devices/mobile platforms, iOS etc., are compatable with the JD Humanoid? I cannot successfully connect to the robot with an iPad; many online discussions have indicated this robot is Windows platform only?
3
2 k
DJ Sures |
question
Ezb_V3
Would anyone be interested in buying one of these? I have one that's been laying around and figured someone might be able to get some use out of it.
1
2 k
thetechguru |
question
Warranty Support On Battery Flipper Power Switch
One of the two battle flippers I recently ordered has a bad power switch that I isolated by using my voltmeter and then a jumper cable to bypass the switch The reason for this post is that I need a URL when submitting a claim Thanks, Frank
3
2 k
thetechguru |
question
Jd Robot Right Shoulder Not Moving
My son and I just purchased the JD Humanoid robot. We are following the tutorials for assembly. After connecting the left shoulder the motor does turn...
4
2 k
notanewb |
question
Preloaded Actions Servo Moves
Hello, Can I see the servo moves and speeds of the preloaded actions somehow? many thanks, laszlo
4
2 k
mezofalvi |
question
Virtual Servos On Second Or Third Ezb?
Can we have virtual servos assigned to more then one EZB in a project? I'm trying to run a script pointing to watch a virtual assigned to a second EZB in my project. I get the following error: Start 1: :start 2: WaitForServoMove(1.V1) > Error on line 2: Missing String Quotes or Invalid Expression at index 1: .V Done (00:00:00.0468763) Here's...
14
4 k
Dave Schulpius |
question
A Variable Range
I cannot get a variable range function to work. [:loop sleep(1000) #get compass value print($CompassHeading) sleep(1000) if ($CompassHeading = 145) Print("Left") # this will...
2
3 k
Andy Roid |