Robot Building Questions

I Would Like To Call My Robot

I would like to call my robot by name. When using Speech Recognition, "robot turn left" or "robot say hello" can I use another name instead, like "Sam say hello"?  Ron

Let Me Ask: How To Control And

Let me ask: how to control and program each servo when serial connection them on a port?

:(Not Totally Sure But I May H

:(Not totally sure but I may have burned out the first i2c port 1 below the camera port, I accidentally touched the first pin there with the negative wire from a digital port in the bottom left corner and there was a burn smell I quickly disconnected the battery and all seems to be working with the EZ4 ( I had a flashback from 2 years ago where I...

When I Program With Blockly An

When i Program with Blockly and the Program is finished the arm servos go crazy and do anything. Please help me. PS: If its important. I have a JD Humanoid

Let Me Ask: When I Program The

Let me ask: when I program the servo with Ez-script language, I need to program BLOCKly and can guide me how to create them?

Is It Possible To Use A Wall P

Is it possible to use a wall plug to power an EZ-B v4? Is one available for sale?

Hello,I Am Working With A 3

Hello, I am working with a 3 phase speed controller for my robot leg project. In order to change direction of the motor I need to either send +5V to a pin or ground that same pin.  Supplying the 5V in not problem but how can I use EZB to apply a common ground signal to that pin on command? Perry

Hi Dj, Let Me Keep The Questio

Hi Dj, Let me keep the question simple. The question is how to integrate the python script and c++ code with EZ-robot. I can understand that Ez-robot can promote and understand VB and c#. Any sample links and examples on how to promote the python script and c++ code with Ez-robot will be helpful.