Asked
— Edited
Resolved by DJ Sures!
I saw in another post a picture of the new EZB V4 board sitting in DJ's hand. It occurred to me that there are few different connectors then was on the EZB V3. notably the main power connector and the white female connectors in the middle of the board. I assume the mail header pins are the ADC & Digital ports and the black female connector is the 12c(Correct?). What are the white female ones and what type connector do I need to attach to them?
I'm waiting for 3 of these V4 boards when they start shipping. I want to be ready to retrofit them into my B9 and take advantage of the new options when they arrive. I want to have what's needed here to attach them and not have to wait weeks again for new parts to arrive.
Thanks! Dave
This is awesome! Your making it hard to be patient!
@Technopro. I'm camping with you. Very hard to be patient.
Awesome info guys. Thanks for all of the details and pictures of the V4.
I noticed a side connection on the ezb. Like on the border or edge ....its 4 pins, what's it for?
Is that the UART connection?
UART Connector is on the WiFi shield above, that header sticking out is the programming header for our development, it won't be there for the production model. Actually there will be an extra 3.3V and Gnd breakouts there if you guys need it. Hope that helps
That's the programming port for us - it won't be there on the production versions. The UART is on the I/O shield at the lower right. In that pic, it has a Bluetooth module plugged into it
Ah I see it now. Thank you.
It would be nice if we could plug in the main power there.