Neopixel Ring icon Neopixel Ring — ARC UI for onboard computers to control NeoPixel rings via serial: test/run patterns, preview and copy Arduino serial commands, includes sample code. Try it →
India
Asked — Edited

Alternate Way To Power Up Ez-B

Skip to comments   Jump to end

My EZ-B was working till last night.. Today when I powered it up.. The both LEDs glowed for a second and then it stopped powering up... Is there any alternate way to power up EZ-B than powering up it with the barrel jack? Or is there any other way to power it up through the barrel jack? What am I suppose to do?

Jump to end

ARC Pro

Upgrade to ARC Pro

Experience the transformation – subscribe to Synthiam ARC Pro and watch your robot evolve into a marvel of innovation and intelligence.

Author Avatar
United Kingdom
LinkedIn Twitter Google+ YouTube
#9  

Now you need to figure out why the fuse blew... or at least be aware that something made it blow.

If you have the time and desire to do it I'd unplug everything, and add each device one by one.

Author Avatar
#10  

When I got my original barrel jack, it was bad. You might try replacing it.

I also blew the fuse. It was a while before I realized about the barrel jack.

:D

Author Avatar
India
#11  

Thanks Rich... I tried connecting one by one... Its the camera... I made some wrong connections to the camera...

Login to post a comment