Robot Building Questions
Drive Real Robots, Anywhere
Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.
Discover Exosphere
Gaming Mouse Pad
Feetech Serial Bus S…
Control Feetech SC serial bus smart servos via EZB UART or PC COM port with ARC virtual ports,...
Feetech RS485 Servo
Control Feetech serial bus smart servos via EZB UART or PC COM port in ARC using virtual ports...
Total Speech Recogni…
Offline Windows speech recognition with open dictionary, confidence filtering, and scriptable phrase...
Run scripts automatically when specified ARC variables change; define variable-to-script pairs, monitor status, and trigger actions.
Floor Map, Touch Path and Navigator enable simple path following; IoTiny hotspot guides your car-Intel RealSense required for waypoint navigation.
L298 Question
I'm having a weird issue with the L298 and the movement panel in ARC. I connected the L298 as explained in the tutorial section. With these exceptions: I used jumpers instead of solder for most...
4
2 k
Maximum Voltage/Voltages For The Ez-B?
Hello. Currently in my robotics project, I am using a lot of electronic components such as leds that are eating up my batteries instantly. I am thinking about using a power adapter to keep the current running to all of my electronics. Is there a maximum voltage other than 9 volts to maintain a strong, on-going current to fuel my project, and if so,...
5
2 k
Digital Inline Multimeter
@DJSures Hey DJ I've seen a number of videos with you using a small square inline digital multi meter. Where did you get it from? I have been looking for something...
7
5 k
Attaching An Led To A Digital Port?
What is the best way to attach an LED as an indicator on a digital port? I tried by connecting an LED with a 330 ohm resistor to the GND and signal pins, and this works, but I just wondered if this should best be done with external power (I plan to add several of these) or off of the EZ-Robot board? I will be running off of a battery once I get...
5
2 k
Very Cool Robot From Robotshop
this is a very cool little robot for under $100 for massages I going to get one for my older sister thats a professional masaage therarapist
13
3 k
Powerfull Robot .Safety Features
At present I am working on a Motorised Wheelchair Base unit using the original Motors,these are pretty powerful and can inflict a lot of damage if great...
13
4 k
Wall-E Led
How did DJ connect wall-e's led for his eye to the ez-b?
23
6 k
Looking To Sell A Upgrade Kit For The Roomba 4000 Series Robot
lot of are using a roomba 400 series with EZB and its a great platform for any type of robot...
22
4 k
Motor Driver
Hi! well i am working on a robot using the rear end of those kids cars they drive around in. the motors are 12 volt,does your motor driver handle 12 volt external power 4 ah.please help!
0
2 k
Generic Error Occurred In Gdi+
Hey, Just a heads up, I am using Windows 8, new desktop, and I am using the camera QR feature in ARC. Though, I get this "Generic error occured in...
9
6 k
Servo Speeds?
What is the max speed of the continues rotation servos? Also, Can the speed be ajusted?(pardon my spelling)
0
2 k
How To Get Wall-E In Autonomous Mode
How do you get wall-e into autonomous mode using DJ's wall-e big(without script) example.
3
2 k