Robot Building Questions
Synthiam Credit
Log In
Earn Free Credit
Share your robots, answer questions, and help others — earn credit toward ARC Pro, AI credits, and robot swag.
Exosphere
What is Exosphere?
Drive Real Robots, Anywhere
Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.
Discover Exosphere
Synthiam Swag
See All Swag
Gaming Mouse Pad
Recent Robot Skills
View All
Feetech Serial Bus S…
Control Feetech SC serial bus smart servos via EZB UART or PC COM port with ARC virtual ports,...
Feetech RS485 Servo
Control Feetech serial bus smart servos via EZB UART or PC COM port in ARC using virtual ports...
Total Speech Recogni…
Offline Windows speech recognition with open dictionary, confidence filtering, and scriptable phrase...
Featured
Inverse kinematics for Robotis OpenManipulatorX: compute joint angles and MoveTo 3D (cm) positions, supports camera-to-CM mapping for pick-and-place.
Featured
Custom 3D JD hockey mask STL for JD robot face, printable and paintable for personalization in Blackhawks colors.
question
Is There A Quick Hack To A Rad 2.0?
I just found a rad 2.0 i want to hack just want to know if it is a few wire hack or a full on for the basic system ? I have not been in there yet ( stupid job lol. taking too much of my robot time)
2
3 k
robotmaker |
question
Introduction And First Question
Hi my name is Dani, I'm from spain and I'm studding for a degree on electronics, but I always love robots, and now I'm trying this amazing board. I just build...
15
3 k
dandielin |
question
Baby Level Electronics Question
Hi Hardware, Is there such a thing as a double-adaptor for 4, 7 and 10 pin connectors? What I want to do is have my Robosapien running normally, but be able...
4
3 k
dalex |
question
Ez-B On/Off Switch
i thought about my wall-e... and thought...and thought... and one of the things i thought of was an on/off switch(painful to open up, close, open, close, etc.) I decided to put a power...
45
7 k
elfege |
question
Need Help With Connecting Ez Robot.
Recently, I bought this EZ robot kit, and everything looked impressive. I built a WALL-E EZ robot from a u command toy. Sadly my EZ robot isn't connecting to the ARC software causing me to feel worried and a little agitated. before it was getting the connections from the Bluetooth adapter, although it still didn't do anything to begin with as I...
7
3 k
Lumpy |
question
Ez-B As A Simple Switch
Can I use my EZ-B as a simple switch? I want to trigger my camera remotely. To activate the shutter I just need to provide a ground to the remote trigger jack on my camera....
3
2 k
DJ Sures |
question
Ez-Board Auto Disconnect
Just wondering, is it possible to shut off the Bluetooth auto disconnect? I'm going to be running the board as a controller for two servos that will move a distance sensor. This means the board will not be receiving commands constantly as I will need to communicate with the sensor. If it can't be shut off, is there an option to increase the wait...
7
2 k
DJ Sures |
question
My Brookstone Rover Hack
while i am waiting on my parts for ROOMBA project,i started hacking the ROVER since my girlfriend who bought it for me wants to see it finished quick i tore it down and...
14
8 k
robotmaker |
question
Compass, Gps
Can anyone advise on some cheap addons for me to add GPS, compass and a gyro to the board
2
2 k
Jaychadw |
question
Shiping
Do You Ship to Faisalabad , Pakistan , Asia. 38000. Or Islamabad , Pakistan , Asia. 44000. Also Tell SHiping charges for both Cities. I am getting this error. Please fix these errors: Cannot verify your shipping information. Please review your information.
4
2 k
sonic40191 |
question
3 Pin Fan
hi i am using a 12v power supply with my ez-b i started to get i little hot so i bought a 5v cooling fan for ez-b but my fan has 3 pin instead of 2 it has an extra signal wire does this make any diffrence i am thinking of connect fan to lets say d1 if i write set(d1,on) it should turn the fan on right?
6
2 k
Rich |
question
Bluetooth Help
Hello,i have this Bluetooth dongle bluetooth And i need to do the initial install of the firmware.the weird thing is i does not find the ezb at all.but it can find my smart phone, and my phone in turn can find the ezb. I am using the windows Bluetooth stack.the USB is windows 7 compliant.i tried everything i can think of, rebooting, changing USB...
6
2 k
derrick |