Robot Building Questions

I Need Short Spacer

I need to make a short spacer similar to the expansion block but just the top and bottom parts of the block. I tried to load the STL file into 3DS Max but I don't know how to remove the middle part, leaving the top and bottom parts, and merge the top and bottom parts, forming a short spacer to clear the Alternate Power Adapter that I put into the...

Makershed Ez-Robot Six Hexapod Kit (Revolution Six) For $99.00

makershed is selling Six Hexapod Kit (Revolution Six) for $99.00 eek eek eek eek

I Powered Up And Tried To Use The Movement Panel And Nothing Worked As Far As Th

I now have the ezb v3 connected via bluetooth. Now , I made my movement panel and setup for D14-D11. I hooked the red and black cable to the voltage from ex power. I powered up and tried to use the movement panel and nothing worked as far as the movement panel. I have power and four wires. How should I handle this problem?

Implementing An Idea

Dear all, I am new to robotics but I have an idea that Iw ould like to create as a demo. I would like to make a nice demo and put a robot in the inner part of a door so I can remotely control it to push the handle of the door to open it. Can you possibly assist me by telling me which components I would need to be able to reach this demo ? Many...

How Zano Raised Millions On Kickstarter And Left Most Backers With Nothing

very interesting story (LONG) Investigation story: https://medium.com/kickstarter/how-zano-raised-millions-on-kickstarter-and-left-backers-with-nearly-nothing-85c0abe4a6cb Zano Project: https://www.kickstarter.com/projects/torquing/zano-autonomous-intelligent-swarming-nano-drone/description Unbelieveable no one saw a functional device (even the...

Autonomoues Wall-E

Hello everybody! My name is Alessio, I'm italian and a new member! I just recently purchased an Ultimate Wall-E robot of Thinkway, and my goal is to turn it into an autonomous robot, just like djsures did with his Wall-E. I wondered, as my model (Ultimate) is very large (about 16" tall) how can I make an internal system, so as to make it...

Listen To Eventhandler In C++ Without Gui

I'm attempting write a small c++ cli program with which I can connect to and control each servo. However, I am running in to the problem of making the connection without using a gui. Does anyone have an idea of how I can listen to the eventhandler without using the gui? What I have so far is this: #include #include #include "stdafx.h"...