520tvl 0.008lux Color Video Mini Cctv Camera

Question

Is it possible to connect a cctv which only has 3 wires pos. grn and video directly to the ez-boaed to by-pass using a USB to your computer? Thanks in advance merne

DJ Sures · Answer

No

Bravia · Answer

No the Ez-b does not have video inputs sorry DJ replied 5 sec earlier

DJ Sures · Answer

Bravia we're in sync!

winstn60 · Answer

@MERNE That's a very sensitive low light camera what are you going to do with it? All sky camera perhaps? You just need a video capture card then it would work with USB though. Some PC's have video capture built into their video cards as well

Redzone · Answer

I did not think so, but thought I would ask. Thank you all. Maybe someday DJ will add this option? Winstn60 I am using it in a robotic head to see at night. -merne

Redzone · Answer

Hey winstn60, do you know which one I would need. I see way too many on ebay? Thanks.

DJ Sures · Answer

Video is a very high bitrate. Too high to share over a Bluetooth connection. Wifi, yes... But also it would require encoding and a pile of other processing. An eZb in the future would do it all, but it would cost too much today.

winstn60 · Answer

I obviously meant via USB to connect to the controlling PC not a direct connection to the EZ- Board. I cant really recommend anything to be honest use your best judgement

robotmaker · Answer

I have a good usb capture for video and will look the model i have,i bought it for my lynxmotion johnny five project and not ready yet to test it with EZB

jstarne1 · Answer

Have you already purchased that camera? Its an analog and will need a video capture card with digital to analog converter. That means it would be hard wired through a coax cable to the PC. Your best off either using a WiFi 2.4 GHz camera or a USB camera both of which connect to the computer. Why not try a 2.4 GHz wireless EZ Cam? You can unscrew the lenses and pop out the IR filter and that makes the camera IR sensitive. Then get yourself a fee IR 850 nm LEDs and those can be your night/ low light illumination. It doest take but a few of these LEDs to light up the viewing area in front of your robot and a descent sized room. Edit @robotmaker video cables like RCA , BNC, cable TV etc are all types of coax . typically the rca video cables are RG58 or RG59 for long runs. Cable TV , Ham radio , Cab radio etc typically use RG6 coax. Analog closed circuit TV systems use BNC connectors and shielded RG6 coax because the can have exceptionally long runs with a solid wire core and shielding.

robotmaker · Answer

@josh there is no coax connection on a laptop or computer and composite video takes a rca plug that plugs in to a capture card You can get one to plug in a slot for desktops,but for laptops only usb,i think there are wireless capture cards but at a high price. REDIT 6-8 -2013 AT 3:45 PM @JOSH mostly camera's only use shielded cables not coax,look at the back of your VCR they use shielded cables COAX is for antenna's,i am thinking you meen shielded cables and calling them COAX coax its a teflon tube with a stiff wire with heavy braided wire around it and has mostly a F connector or BNC connector on it. A few video camera's use bnc connector and it may be coax,most board camera's use shielded wire with rca

Redzone · Answer

HI DJ, Hopefully in the future you can add a camera feature. I know I WOULD BY ONE, I have 3 ez boards now. Hi Josh, The wifi camera is too large for my needs. I may use them on my next project. Keep up the awesome work DJ!

jstarne1 · Answer

@ merne really the eZ can is too big? What size in the camera you are wanting to use? A spy camera?

Toymaker · Answer

Yes, it is possible to connect a CCTV camera wirelessly and use with ARC software. CCTV cameras are composite video output so you can use a wireless video sender. I use this method on my robots On the robot the CCTV camera is connected to a 5.8GHz video sender (transmitter) on the other side the video sender (receiver) is connected to an EZCAP (low cost video capture device) which then connects to the computers USB port I have this working very well with ARC, I choose 5.8GHz rather than 2.4GHz because there is a lot less interference

MovieMaker · Answer

@Josh, I'd like to know more about the IR thingy. @Toymaker, that sounds nice , too. How is your AIMEC-4 coming along? Also, the lighting in my apartment has a lot to be desired. Would the IR LEDS make it light up nicely, or would everything be green? :-)

jstarne1 · Answer

I don't know I've never used one in total darkness but if I remember back when I was playing with it that the IR did not show up green it was purple hue gray scale. I believe the green filter we see on TV and stuff is a special effect/ feature of the camera.

Toymaker · Answer

Hi Mel, the AIMEC:4 is still under development, but I am now concentrating almost 100% of my time on the EZ:1 and EZ:2 robots as we think there is currently a much bigger market for an advance kit robot. The AIMEC:4 is an advanced manufactured self contained robot that we want to sell as an household appliance, I am convinced that in a few years household robots will be common, we now are thinking that we may be a bit ahead of our time on this, so most of our resources are going into the EZ:1 and EZ:2 robots. The AIMEC:4 will be completed and we plan to be selling the machine by 2016, I already have personally spent over 100,000 on the AIMEC robots development, its an expensive business.

Rich · Answer

IR LEDs do this to the image

jstarne1 · Answer

Yup that's what I got with the can but using 850nm LEDs when I got close to something you could tell a slight purple hue. Its works well though as long as your aren't chasing a red ball lol

MovieMaker · Answer

I gocha! Thanks! to both of you. :-)

Redzone · Answer

Hu Toymaker, Do you have a part number for the 5.8GHz video sender (transmitter) and receiver? Thank you!

Toymaker · Answer

@merne I hacked these I just use the PCB and they work great on the AIMEC:4 robot www.amazon.co.uk/PAT-530-5-8Ghz-Wireless-Transmitter-Receiver/dp/B00B5TLIV0/ref=sr_1_16?ie=UTF8&qid=1370614429&sr=8-16&keywords=5.8ghz+video+sender I have seen them on Amazon for around 30 ignore any bad reviews as they are about Sky compatibility and not on how good they work. I will post a picture of the hacked boards if you need it.

robotmaker · Answer

@toymaker Good find,i will get one to compare to my usb video capture card.

robotmaker · Answer

I SEE its from china,and ebay its about $50.

Redzone · Answer

Hi Toymaker, Yes I will need the hacked pictures. I looked this unit up and I did not see a usb connector for the PC. Thanks in advances. Mike

Toymaker · Answer

@Mike, as I explained in my original post you need to connect the receiver to an EZCAP (low cost video capture device) which then connects to your computers USB port. Here is a link to EZCAP

www.ezcap.tv/

Redzone · Answer

OK, now I get it. I am a little slow sometimes. Thank you Toymaker!

robotmaker · Answer

GOT THIS ONE SAME specs as EZCAP but at $9 including shipping EASYCAP USB VIDEO ADAPTER

Toymaker · Answer

@Mike, here is a photo of the hacked video sender.

Using a low light level CCTV camera is a huge improvement on the Konig wireless camera, the one in the photo cost around 50 and has a quality glass lens and works down to very low light levels.

Hope this helps.

Redzone

520Tvl 0.008Lux Color Video Mini Cctv Camera

Upgrade to ARC Pro

Products

Community

Support

About