Feetech Serial Bus Servo icon Feetech Serial Bus Servo — Control Feetech SC serial bus smart servos via EZB UART or PC COM port with ARC virtual ports, speed, position, release, and acceleration. Try it →
Asked — Edited
1 Participant

Using Init Script To Set Servo Max, Min

If you use the setservomin and setservomax then call this script when ARC connects will these servo min max setting ever change?

I mean if you use the Auto Position and set the servo higher then the max set in the init script will the servo more further then the allow setservomax that was setup in the init script.

Also, if you use the release all command and do not rerun the init script will it still know not to go passed the setservomax?

Thanks in advance, merne


ARC Pro

Upgrade to ARC Pro

With ARC Pro, your robot is not just a machine; it's your creative partner in the journey of technological exploration.

Author Avatar
PRO
Synthiam
LinkedIn Thingiverse Twitter YouTube GitHub
#1  

They'll never change:)

The only time the limit values reset is when a new project is loaded.

It's impossible for a servo with limits to move past the limit. The limit code resides in the servo module itself, so there is no deeper calling function. Meaning nothing can override a servo limit.

#2  

Thanks DJ. This is good news. :)