Fender For Roli

Question

here a new idea for the roli.

RoboHappy · Answer

Nice! gives it sort of a racing look to it

thetechguru · Answer

Interesting idea. I might adapt that idea to make rests on the front for the arms to sit on so I can release the servos without having the arm drag on the tread. Alan

Nomad 6R · Answer

hi guys am glad you like it. his name is speedroli

DigiEddy · Answer

Nice light on top !

Nomad 6R · Answer

digieddy you have good eyes.

JustinRatliff · Answer

How did you fit the LEDs in there? Are you controlling with directly from the EZ-B with digital on/off or PWM?

Nomad 6R · Answer

JustinRatliff yes just a let 3 volt and use black and white on the ezb. the led sits loose in the peg.using the pwm. i cut a small piece out the peg to let the wire go thru.

Dave Schulpius · Answer

Stop it Nomad! Your having way too much fun. LOL. Seriously, I'm very impressed with your creativity and talent. Nicely done. I'm so glad you kept at your connection issue and continued to build.

Nomad 6R · Answer

dave yes i like to be creative to see what i can get out off a product. then i see what could be usefull.does this excist ?double top gear ? to connect choulder to the querre part.

JustinRatliff · Answer

I think it might make more sense to make a new 3d .stl part with those two mashed together rather than a double sided gear. Do you have a 3d printer to print parts if a .stl is created? I guess you could hot glue them together as well.

Nomad 6R · Answer

i did glue them together but ad also ad nut and bolt in. have no printer.but i have a friend who has a printer.

Nomad 6R · Answer

forgot to tell,the meaning off the double gear chaft is to be able to connect other , parts.like choulder clip or querre clip.its easy to swiths.

JustinRatliff · Answer

So you could end up with a "male to male clip" or "female to female clip", or "male to female" like you showed. That's interesting. I don't think a double ended 3d printed plastic gear would work that well. I could see it breaking and or not fitting right. I don't think such a metal exists either. Your current method for attaching them sounds pretty good. But 3 separate .stl files for those ez-bits shouldn't be too hard to make. I'll give it a shot sometime soon.

Nomad 6R · Answer

great thanks.am looking some further on the internet to.will ask james here.

Nomad 6R · Answer

you also could change the angle from the connected parts by using, a special gear.sofar only i found gears with big teeth.

pashley · Answer

Norman Great idea putting an LED inside EZ Bit peg! I plan to try that in some of my Six creations. Thanks Peter

Nomad 6R · Answer

your welkom peter the peg is 3d printed. patrick

Nomad 6R · Answer

here another idea for speedroli. a formula one wing.

Dave Schulpius · Answer

Ah, cool. We call that a Spoiler.

Nomad 6R · Answer

hi dave yes thats the word,back spoiler.

Steve S · Answer

Nomad, You have come up with some very creative ideas!

Nomad 6R · Answer

hi steve S thanks glad you like it.i hope to find one day the double gear. that would be a good contribution to ez.

Nomad 6R

Upgrade to ARC Pro