Ha ha ha. Yes - R2-D2.
I know, it's original.
Anyway, finally managed to start on my R2.
This is a small scale prototype - planning on building a full scale version but thought I'd start small.
Not much to report at the moment, but as I progress I'll post more.
I'm using the Hasbro interactive R2 as a base.
And that's it so far.
By robt1275
— Last update
Discover more robots
Wallekid1's Wall-E Made From Scratch
WALLE replica: custom reinforced tracks, moving arms and neck, independent track drive, LED eyes, random sound notes,...
Luis's I2c Ezb Arduino1 Sensor
Use an Arduino as an I2C sensor controller for EZB3/4 to read PING ultrasonics via Ez-Builder with simple Arduino and...
Henrik's Cardboard Wall-E!
DIY Wall-E cardboard prototype with tracks, pan/tilt head and arm, camera eye, LED light, distance & temp sensors,...
Welcome to the Forum...hoping to hear more! ..and see more!
Pics!
R2 never gets old. Welcome aboard.
Progress so far...... Pulled the original circuit boards and sensors. Modified the internals, removing the battery compartment.
I'm planning on using as many of the original sensors as possible.
Next stage is working out the dome rotation.
Here's a couple of pics.
I've got an empty..... ha ha ha.Nice Pics
For the dome, if you want fast, use a dc motor with a smooth wheel attachment(requires bearing for the head to turn on). If you want mid to slow, continuous rotation servo.
I just used the motor that was built in to my R2.... Works perfectly for moving his head. Was your motor not functioning? Not sure why you would/did remove it otherwise
@rryerson - How did you get the rotation sensor working?