-635260592782323404.jpg)
-635260594142255894.jpg)
I had the following hexapod. It had a dead controller.
After v3 upgrade. Also found a bad mini servo to and replaced.
learning actions and frames while, I wait for six to ship.
:)
j
update: robot chassis is 12 servo hexapod by dagu rs024, poor man's hexapod.
By jdebay
— Last update
Discover more robots
Bhouston's You Never Know What Happens When You Leave The...
Left phone recording captures unexpected footage worth reviewing
Cardboardhacker's Alex Cardboard Omnibot Twin
Build ALeX humanoid robot - 4.5ft, lightweight frame using servos, ez-B camera, 12V motors/battery, recycled materials...
Steve's 2 Ft Biped Walking(Shuffle) Robot
Omni-wheel robot build: overcome turning and weight distribution with center-pivot knees/hips; PVC construction and...
new cloths for mz.
:)
j
Having fun!
J
jdebay, Your mini six looks great. Is that the standard mini six kit from Anthony XL robots ($79), or was the EZB3 cam case extra order? What are the inside body dimensions and overall outside leg to leg? Do you utilize a cam tilt only and let the robot turn for the pan? Anything else you might say is welcomed. Thank you, Steve S
@Steve S inside 4 1/2 inches, laying flat outside leg to leg 12 inches. But also check with Anthony-XLRobots.com
:)
j
jdebay , Thank you for responding. Your mini-zip was interesting running EZB3 even before upgrade. I was hoping to purchase something inexpensive and similar for a grandson. Steve S
tried to upgrade him to v4 controller, NO go, it needs 3amps for the servos to work.
Old mini servos...
But added the following v3 ping...
j
Jdebay, If I understand you right, you are saying you could not get ezb4upgraded on your mini six because of power draw? I have noticed that my mini six is a battery hog. 12 servos working at once. Maybe EZ robot Six demands less amp draw with new servos? This is interesting, because I also thought of upgrading my mini 6 with one of my new controllers when I receive them.
@Steve S
v4 can not handle 3 amps (Vcc Continuous Current Draw - 1 A ) taken from v4 datasheet.
i tried. Original controller not ezb, was rated for 3amps too.
j