Connection Questions

Question

am having problems connecting to v4 keep getting this report

Quote:
21/03/2015 15:22 - Attempting connection on 192.168.1.1:23 21/03/2015 15:22 - Connected to 192.168.1.1:23 21/03/2015 15:22 - EZ-B reports EZ-Robot OS v25.5 21/03/2015 15:22 - Connection Failed: System.Exception: This device is not an EZ-B. Please follow the online tutorials on the EZ-Robot website. at EZ_B.EZB.Connect(String hostname, Int32 baudRate) 21/03/2015 15:22 - Disconnected

I've had no trouble getting connected in the past I've had the v4 since December tried resetting v4 still no luck any help would be appreciated thanks

Dunning-Kruger · Answer

I assume you ezb4 is in ap mode? You kind of started in the middle here so not sure what you have tried and what you haven't

Steve G · Answer

Have you updated the ARC version to the latest one again (uninstall, fresh reinstall)?

Dunning-Kruger · Answer

Have you followed all the online tutorials on how to connect and various connection modes?

thetechguru · Answer

It looks like you are connected to your router and not the EZ-B in AP mode. You need to first connect your WIFI to the EZ-B and then connect to it in ARC. If your EZ-B is in client mode, then you are trying to connect to the wrong IP address. You need to hit the Search icon (little antennae) next to the IP address to find your EZ-B. Alan

bborastero · Answer

I reset the v4 so its in ad hoc ap mode @thetechguru I tried searching for ip and couldn't find one at all and if I click yes on first message it takes me to a tut for v3 on youtube

CochranRobotics · Answer

If you go to the command prompt on your computer and type IPConfig then press enter, you should be able to see what your IP for your computer is and the gateway for your computer. I am guessing that your ip is 192.168.1.something and that your gateway is 192.168.1.1. This is a pretty common network configuration. If this is the case, you will need to connect to a device (maybe a cell phone) to the wifi network presented by the EZB. It will have a name of EZBsomething. From there, connect to 192.168.1.1 using a web browser on the device. Set the device to Client mode and supply the SSID of your network. It will also ask for your password for this SSIS. Click the apply button and your EZB should connect to your network. You should then be able to search for your EZB using the little antenna icon in Connections in ARC. Set your cell phone back to your home network and you should be good to go. If you need to run in AP mode, you will have issues if your network follows the 192.168.1.x scheme and you are connected to it (through another wifi card or through a wired connection) and your EZB. This is because your network will assume that 192.168.1.1 should go to the router (if that is your gateway) instead of the EZB.

Dunning-Kruger · Answer

@bborastero does you ezb appear in your wifi list? If so are you able to connect from there? This is without ARC running...

bborastero · Answer

@d.cochran that might be the problem our internet provider are in the midst of upgrading the service and gave us a temporary router. I tried doing the phone thing without any luck so I'm wondering if theres a way of changing the routers ip address

bborastero · Answer

@Richard R yes it does appear in the wifi list and yes I can connect to it just not in ARC

CochranRobotics · Answer

You can change the address on the router probably. What is the brand and model of the router. I will do some looking.

bborastero · Answer

D-Link DSL 2680 and thanks in advance

Dunning-Kruger · Answer

Ok, now I am up to speed...

thetechguru · Answer

Before we start playing with router settings, go back to basics. If your computer has a wired and wireless lan connection, unplug the wired. That is where an IP address conflict would originate. Reset the EZ-B (press the reset button while powered on). This will make sure it is in AP mode. Follow the tutorial for connecting in AP mode. Basics below: Open wireless settings on PC and find access point starting with EZ followed by some letters and numbers. Connect to it. Start ARC and connect to the default (192.168.1.1:23) Once that is working, we can get the EZ-B talking to the router so you don't need to be disconnected from the internet when using the EZ-B. Alan

bborastero · Answer

yay you da man Mr Techguru

bborastero · Answer

thank you @Steve G @Richard R @d.cochran for your time wish I could credit you all for your help but something as simple as unplugging a hardwire has to take the biscuit again thank you all

Steve G · Answer

@bborastero. Sometimes it's the simplest things that are easily overlooked. Glad your back up and running.

stha2232 · Answer

Why is everywhere 192.168.1.1 ? The important ip address.

DJ Sures · Answer

Internet is a great resource. It's called a private IP address. They are addresses that will not work on the internet but only work in your local area network. More here: https://en.m.wikipedia.org/wiki/Private_network

bborastero

Quote:

Upgrade to ARC Pro