Hi heres a few pics of my first robot project it's a bit rough around the edges and I'm afraid its another Wall-e!
Most parts are the same as DJ's build but I added a few tweaks of my own.
First off I wanted to keep the neck looking as close to real as possible and found that the hinge that came with the camera would make a good fitting joint, it also meant I could use a push rod through the centre of the neck and keep the stock pivot for the head to turn left and right.
Next up was I also wanted to keep the movement in his "eyes" so that I could add expressions etc so I got a small micro servo and mounted it in the back of one of the eye pods with a pushrod across to the other one.
And there you go, happy wall-e...
... and sad wall-e!
With all the push rods and servos inside it didn't leave me much room for a battery but it does squeeze in with the ezB mounted on its back.
My next project is to learn some more of the software side of things as I have a gyro/accerometer/compass module that I need to get working using i2c...
Hope you like it
Tom
Discover more robots
Csa459's Ok Guys Wet And Dry Vac For Robot Start With
Jayutmb's My Ez Robot R2 Project :)
@mcsdaver Yeah they are great, I wish I'd mounted the one that makes the eyes tilt further in as there was room and it would have been almost completely hidden but I was fed up of taking the head apart!
I've spent some good time studying your pictures and I think I've almost figured it out how you worked the camera hinge into the neck assembly. But yeah, a few more pictures would definately give me the extra clues I need.
I'm assuming that you've used the plastic end of the camera hinge (discarding the metal end that attaches to the camera with 4 screws) - did you also cut down on the width?
Yeah I got rid of the base bit and trimmed down the part that goes inside the upper section of the neck so it was hidden. Heres a few pics
:)
Hi @Tom, thanks a lot for those extra pictures!
This weekend it'll be the time for me to do a few assessments on how I will be doing this. Much appreciated!