cE9s4PsOgeBQIORwjd5!~~60_1-634818020230156250.jpg)
BO)Lupuc4g~~60_35-634706297915000000.jpg)
LupbT6!~~60_35-634706298769375000.jpg)
C5j!~~60_35-634655044863125000.jpg)
C5j!~~60_35-634659603510781250.jpg)
C5j!~~60_35-634651704046230469.jpg)
This project has evolved some , the basic rundown is I'm modding two Omnibots , one a regular the other a larger 2000 model. I will have two ezb kits , rad base idea was thrown out because of so much noise but could go back on the table if the omnibot drivetrain is too weak to pull it.
By jstarne1
— Last update
Discover more robots
Bhouston's My New Robot
Introducing a new robot with a short demo video showcasing progress and community support.
DJ's JD Humanoid Puppet
Sync two JD robots' servos in real time with a Synthiam ARC script using PWM Servo Feedback to mirror positions over...
Ezang's New Hand Progress, 3D Printing, Glyphs , Ultrasonic,...
Synthiam ARC controls multi-controller EZ-Robot with 2 Iotiny, 2 EZB4, HDD/996R servos, RGB eyes, camera and motor...
Hi sfoy
Just the weight of the stripped down gun and the rail , so if the servos are strong shouldnot be a problem. But that would have to be tested.
Steve_C .
PS if the arm was made to carry a beer can it will carry the airsoft gun no probs.
Yeah, sounds like a great idea though....
J.. what's broken with the arm?
The gear and mount.at the elbow , so there's nothing.to connect.the claw to the arm. Thats why I was thinking of the gun right there.
I found some pretty good pics of arm. Could be fixable depending on what it is
The gear that also attaches to the lower arm in the elbow is broken in pieces , I don't have pieces to glue it back either.
pretty soon this ppst will hit 100, i guess mine too may be.OMNIBOT 2000 is a good robot to hack
I don't.think.it will , after this arm is done , the body stretch and vacuum molded in its off to the painters and I will start a new thread.
Well you could get the measurements from the other arm gear.
I get whored out at work to a few different companies and this is one of them.
Stage 8
They have all kinds of goodies around as well as some machines. If you can get me some good measurements I'll see what I can come up with.