By Autiboy
— Last update
Discover more robots
Robot56's Astromech Droid
Build a full-size astromech droid from styrene and 3D-printed parts; dome uses a security mirror with a 2"...
Cem's Ziggy The Hexapod
Rebuilt Hexapod Ziggy with HDD servos eliminates servo buzzing; 20servo metal frame, heavy battery load, Wave gait...
Ezang's Following, Tracking The Blue Line With ARC
Synthiam ARC camera movement tracking for easy object tracking; troubleshooting tip: tail orientation can cause...
@autobot Bruce e says hi . I made 2 inmoov Robots that see first one used PLA and PET G. That robot had a fall all the PLA shattered the PET G filament was not damaged at all. BRUCE E number 2 was only printed with PET G. Which is easier to print than ABS but stronger. I PRINTED BOTH Robots on a flsun kossel large format delta printer. I am on a cruise in the Caribbean so my entries into synthiam may not continue until I get back the controllers used are a ez_B in the body and 2 IO Tinies in each arm this was done to reduce wires . BYE for now.
Nice job guys!!
@nallycat OMG I checked the link, this is sooooo funny!! How did you find this? And the lyrics are German!!!
@mickey666maus I am a member for the Facebook inmoov makers site and someone posted that video. Yes it is very funny, the time it takes to make one inmoov is impressive but printing several unbelieveable. And they were well done several with legs .I thought the video sounded German.
That robot looks great! I also built an inmoov, but I never finished it.