So I see a lot of wall-e's around
That made me thinking, it's time to show my wall-e
I started with the small wall-e ( the interactive )
What i learned from him i put in the big wall-e ( a U-command )
I used the old board from the wall-e for the sounds.
made the bot in 2 parts the upper half is full with servos..... and a sensor
And off course a good accu-pack is used for hours of fun ( 2,5 to be sure )
And that all together in a small compartment
So i proud show you all my wall-e and a lot of thanks to DJ ,radmeck and bret.tallent for helping me!!!
By Pabi!o
— Last update
Discover more robots
Ezang's My New And Improved Talk Servo
Enhanced ARC Talk Servo with Arduino Arc software for improved servo control and seamless Arduino integration
Athena's R2D2 Testing
Seamless ez-b integration with my robot, main features tested successfully; vision and speech enhancements planned.
Morbeious's Dev Servo Bot
Build a simple Dev Kit hexapod with 3D-printed parts, camera and sonar options; parts list: body, servos, extension...
Hope you can see it in the picture. What i did was use the old connector from the main board to the small extension board
I split those is 2 groups one for the record-play-button to make a sound the other 3 for ir ( so you can control the sounds with the remote.)
on the other side i solderd the power and signal
Thanks, GREAT pics! Of course the one thing I didn't keep was that connector from the main board... I should still be able to figure it out. Also I want to use the EZ-B software rather than the remote so we'll see how that goes! Thanks again!