I have an ultrasonic distance sensor from maybe 2014 or 2015 it has 4 wires, what ports do I plug the sires into?
WiinterU
USA
Asked
Resolved by DJ Sures!
1 Participant
What Ports Do I Plug A Ultrasonic Distance Sensor Into?
Related Hardware (view all EZB hardware)
EZ-B V4
by EZ-Robot
EZ-B v4 with Synthiam ARCx controls servos, sensors, camera and audio over Wi-Fi or USB serial, no firmware needed.
Wi-Fi / USB
Servos
24
Camera
Audio
UART
3
I2C
ADC
8
Digital
24
Related Robot Skills (view all robot skills)
Ultrasonic Radar
by Synthiam
Ultrasonic on a servo sweeps 180°; radar shows distances and obstacles, integrates with movement panels for automatic avoidance, scriptable GetPing
Ultrasonic Collision Detection
by Synthiam
Stops robot movement (no steering) when an EZB-connected ultrasonic sensor detects an object within a set range; integrates with scripting and paused polling.
You can find the manual for all robot skills in their respective page.
Here's details for an ultrasonic sensor using radar: https://synthiam.com/Docs/Skills/Ultrasonic-Distance/Ultrasonic-Radar?id=16101
Here's details for an ultrasonic sensor on it's own: https://synthiam.com/Docs/Skills/Ultrasonic-Distance/Ultrasonic-Distance?id=16090
The DOCS section should be able to help you as well
Okay thank you!