Is it possible to invert the servo in the servo profile.servo file of ARC?. Something like SetServo (d15, invert). I've searched and all I can find are doing it in a control. But I'd like to do it in the profile or init. Some example code or point me to where to look for more info cause I'm not finding it on my own. Thanks
flatwoodsdad
USA
Asked
Resolved by DJ Sures!
1 Participant
Servo Inversion?
Related Hardware (view all EZB hardware)
EZ-B V4
by EZ-Robot
EZ-B v4 with Synthiam ARCx controls servos, sensors, camera and audio over Wi-Fi or USB serial, no firmware needed.
Wi-Fi / USB
Servos
24
Camera
Audio
UART
3
I2C
ADC
8
Digital
24
Related Robot Skill (view all robot skills)
EZ-B V3 Configuration
by Synthiam
Manage EZ-B hardware settings: edit Bluetooth name and apply updates to restore altered configurations.
It’s per control. Because some controls that run off devices, such as joysticks and wiimote have their own servo direction. So it’s per control.
see here: https://synthiam.com/Products/Controls/Overview/Servo-Controls-17394
Thank's for the quick response. I had read the servo control link. But was still hopeful there was scripting under that invert checkbox and not something hardcoded into the software. Your site and your products are great. So much info. Unfortunately I'm legally blind. Might sound crazy but text and scripts I handle fairly well. Pictures, GUI's and checkboxes drive me nuts. But thanks a lot. You guy's and 3D printers have done more for people like me than you'll ever know.