PWM Slider — Slider to set EZ-B digital PWM for motor speed or LED brightness; shows duty-cycle, stop button, and board/port selection. Try it →

Tutorial

R2-V2

Canada

Published Aug 2019 — Updated Aug 2019

Download as PDF

3 Participants

Steps

Lattepanda Beginners Guide

Step 1 of 6

In this Tutorial we will go over the LattePanda micro controller and its integration with the Synthiam Platform

Related Hardware (view all EZB hardware)

Lattepanda by DF Robot

LattePanda with Synthiam ARCx runs headless, loads EZB firmware on the built-in Arduino, and controls robots from any browser

Wi-Fi / USB

Servos 12

Camera

Audio

UART 1

I2C

ADC 5

Digital 12

Install Firmware and EZ-Builder

Latte Panda: https://synthiam.com/GettingStarted/Build-Robots/LattePanda-18256 EZ-Builder: https://synthiam.com/Products/EZ-Builder

Next Step »

Upgrade to ARC Pro

ARC Pro is more than a tool; it's a creative playground for robot enthusiasts, where you can turn your wildest ideas into reality.

Compare Pro Features View Subscription Plans

DJ Sures

PRO

Synthiam

#9 Sep 2019

Make sure arduino ide is closed before connecting to the internal lattepanda arduino with ARC

robo rad

Canada

#10 Sep 2019 — Edited Sep 2019

So this ide is something I have not checked or familiar with. Will have a look at the meaning in panda troubleshoot forum.Thanks again DJ! Ah Ok,LOL did not understand the Lingo,I get you now,seems many people have my problem,there are sollutions I can try.