It's just a concept right now but I wanted others to see that the scale doesnt quite match. Right now its just stacked on there and neck is a little too long.
By Troy
— Last update
Discover more robots
Jeremie's Ravage The VHS Tape Robot
G1 Transformers-inspired Ravage VHS tape robot with EZ-B IoTiny, 360 servos, LiPo battery and fold-down stand for...
Toymaker's Introducing The Altair Ez:2 Robot
EZ:2 robot with EZ-Robot V4, face & object recognition, advanced AI, modular low-cost design, integrates with...
Smarty's Synthiam - My Robi 2.0
Robi 2.0 with EZ-B 4.0: 21 servos, 22ft cables, 6 sensors, camera, LED boards, stereo speaker; 17.8 in tall, 5.0 lb, 6...
I found the stock motors are 3 volt mabuchi RE-140 dc brushed motors. I bought a couple to repair my left claw because the motors were badly corroded and locked up. On eBay many auctions just call them 3 -6v dc hobby motors.
the RK-370CC has more then double the torque of the SA-260 and same size also only problem it runs at 12 volts
also FC-260SA is shorter the SA-260 with double the TORQUE and 3 volts to 6 volts
12v isnt a problem. I will run 12VDC motors on it anways.
Yea that's the great.thing about own , use 12v for more torque and own to control power / speed
Im still waiting on my fuse block to arrive. I will use mini blade fuses and also use the drawer as the battery/fuse box.
Ash , I'm using round glass fuses , its easier to tell when they blow / and test , I think my block from radioshack is 30 amp per fuse and 6 fuse lanes.
I found the fuse box at a good price and now is on its way. www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=17138
Cool! Mine has 6 as well. There was a version that had a tiny led showing power running through it but I figured it was a waste of power since I could tell right away which was blown by what wasnt working.