All Community Content
Experience early access to the latest features and updates. You'll have everything that is needed to unleash your robot's potential.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Sticker
People know your robot is capable when they see it is powered by Synthiam. These stickers are heavy duty for both indoor...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Interactive camera control for ARC: click-to-center and edge hotspots to pan/tilt servos, adjustable fine-tune and multi-camera support.
Featured
EZ-B powered 20-DOF PHILO humanoid: AutoPosition setup in hours, servo power tips, regulator heat and brownout notes.
question
Motor Control
Hello! I have connected two motors to the EZ-B using an HBridge and can turn the motors on simultaneously for the same amount of time through commands such as Forward(). Is it possible to control the motors separately (e.g. one on and the other off, one rotating clockwise and the other counterclockwise, etc.) when using only one HBridge?
4
2 k
DJ Sures |
question
Help With Wall-E Bot
I bought the complete kit and a used Wall-E from ebay. Documentation says you can find the Wall-E as Robot 1 in the SDK, but I don't see it in there , is it there? has it been renamed or removed? Thanks in advance for any help...
0
2 k
red61jaguar |
question
Speaker On Ez-B
hi, Reason i am writing this is because i want to be able to play mp3 sound on my robot i know that ez-b has support on sparkfun mp3 trigger but it is too expensive it cost 50dolar+shipping is there another way to play mp3 sounds on my ez-b, a simple circuit maybe or another cheaper device that will do what i want thanks and cheers
6
3 k
Lumpy |
question
Help Me Build A Robotic Photographer Wiht Sony Party-Shot
HI I'm a newbie and appreciate any help I can get. I already did a search for photographer and sony party...
46
6 k
robotmaker |
robot
Cirkeith's Upgraded Wall-E
WALL-E inspired mobile robot controlled by a wireless Xbox 360 controller, upgradeable with EZ-B kit and embedded hardware for future autonomy
8
4 k
bret.tallent |
question
Ezb Script Manger?
how do i move my current scripts,into the script manger without rewriting it all ? thanks guys cory
3
3 k
csa459 |
question
Where Is My Ez-Robot BBC Documentary
I'm watching this documentary this evening...
3
3 k
robohobo |
question
3.3V Vs 5V Strapping On Serial Connector
Another post reminded me of this question I've been meaning to ask. The underside of the EZB has traces near the bluetooth connector that seem to me like a user selectable voltage to the connector. My question is: Can I break the trace for the +5V jumper pad and solder the jumper pad for +3.3V? Also would this change the logic levels on that...
3
3 k
DJ Sures |
question
Rad 1.0 Voltage Question
Does anyone have any thoughts on whether the stock RAD 1.0 hardware and electronics will run on 12v? I want to test it all before I start modifying it.
5
3 k
robotmaker |
question
Are There Any Engineers With A Degree In This Forum
I need to ask a question about something I know RICH will post or others will post . I would like only please engineers answer this post. I can stop others posting on this post ,but only hope a engineer only will answer it. EDIT 3-19 Sorry guys forgot to ask what type of engineer i need help from I need a electronic engineer like me to ask a...
21
5 k
robotmaker |
question
Ez-B Tx/Rx Pulse Level
Is the Tx output 5V? Is the Rx input 3.3-5V compatible?
4
2 k
dicka |
question
Schematic Software
Hi, What programs do you guys use for creating electrical schematics of your creations? I would need something compatible with Windows 7 & 8. Thanks, Mike
10
3 k
Wolfie |