All Community Content

Multiple H-Bridges On A Single Project

Hi All So apparently the only way to use multiple H-Bridges on a single robot in is to create multiple project widows? Correct? When I attempt to add a second H-Bridge I get the message one H-Bridge per project. Thanks, Daniel

Ping Sensor Help

I am having a problem with the ping sensor. I have the sensor hooked up to D8 and D9. I have servos and an H Bridge connected but not doing anything with them. I am using the ping distance control to view the result and they seem very unstable. With a stationary target the reading are bounce between 16 to 18 (which is probably an accurate value and...

Hello, Newbie From Leeds

Hi there, Really just an introduction, as my printer has not arrived. (I go to pick it up in an hour or so, so quite excited) I have however, thought it would be a good idea to join a 3d printing forum as I have never done this myself. All previous rapid prototyping has been done by professionals..... So, I am getting a Makerbot 1(Clone) dual...

Help With Sensor

Hello such, anyone have an example of how to work the sensor programmed in C# or is in any SDK sample? I hope your help. regards

Assigning Scripts To Wii Mote Buttons

any one have any practice adding up and down scripts to wii mote buttons? I so far have only been able to add one function. I am unsure if there is a command in the scripts or if I can add my script to key controls. Any advice would be appreciated. What I am trying to do is to make buttons 1 and 2 on the wii mote make my arms go up and when I...

New Contollers - Need A New Laptop

OK, I'm starting to get the stuff together that I will need to start working on B9Greg's new control system. His present laptop is running Windows 98 - What should I be looking for to use with EZ robot software and running B9Greg at conventions? Thanks! Greg

5V Servos And Ezb4 5V Regulator

Hi all been here some time doing listening not speaking and cant wait for my ezb4 to arrive. I have built a full size R2 and have all the dome servos in place ready to install my ezb problem I have is will the board power the servos at 5v or will I need the in line regulator fitting. It is tight for space now and I just hope I can fit it all in....