All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Autonomous AI
Autonomous AI robot skill for ARC: vision-based LLM control, speech, movement, animations, memory,...
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Featured
Real-time TinyYolo object detection for ARC Camera Device: tracks 20 classes, populates camera variables, triggers tracking scripts, 30+ FPS in HD.
Featured
Robotic Power Wheels jeep platform using EZ-B for control, dual 12V batteries, R/C drive, pan/tilt camera, siren, LEDs and heavy-duty steering.
question
Ezb V4 Wifi Controller Failed Again. This Is My Second Ezb That Has Failed. An
Back in Dec, 1024 I received an EZB that worked for about 4...
31
7 k
Nomad 6R |
question
Advice On Using Release() Command
I have a general question regarding the Release() script command. What I would like to do is to add this to some of my scripts after a Sleep() duration command to release some of my servos to save on any unnecessary servo holding strain and also to save on battery power. But I read in a post somewhere recently (can't find the thread I saw it in at...
20
5 k
Steve S |
question
New Robot Kit Being Released Today By Meccano
Maybe DJ can set up the motion capture with EZ-B. Take a look at this video. https://www.youtube.com/watch?v=Q03nIupGAIQ
11
5 k
thetechguru |
question
Ezb4 6 Pin Camera Extension
I have read the threads concerning the EZ3 camera and extending or adding to it and I have seen threads on making an extension for the 6 pin 2.0mm JST connector on...
9
3 k
Hal |
robot
Minxyup's I Want To Build A Larger Versi
Build a larger JD robot by pairing servos per limb, add arm linear extensions and leg blocks to reach countertops and increase height.
0
2 k
Minxyup |
robot
Derekg's I Want To Make An Autonimous R
Autonomous robot that seeks sun to solar-charge, senses people to hide like an insect, and measures how long it can survive.
0
2 k
DerekG |
robot
Tim's I'll Be Building A Robot For R
Robot that picks up Roomba/iRobot, carries it up stairs or to other locations and restarts cleaning, extending coverage without buying extras.
0
2 k
Tim Brian |
robot
Troy's Meet Pinhead!
Concept model scale mismatch: stacked components and an overly long neck.
288
29 k
Troy |
question
Send Serial Command Question
ok I am sure its an easy .. fix and I cant see it.. but here it goes I have the ramp script running for my sabertooth on D7 and it works great ( thanks Rich) However, I have my R2's dome going to a syren 10 that is hooked to D8 and I am having difficulty getting it to work... I have the movement panel used up for the sabertooth... I thought I could...
9
3 k
Jayutmb |
question
Pride Jet-3 Robot Project Battery Charger Question.
Greetings Everyone, So I'm building my first robot using an EZ-Robot EZ-B, a Sabertooth 60 X 60 Motor controller, and a Pride Jet-3 Powered Wheelchair as the base. Got all my parts together, just have a question about the battery charger. The chair has a Pride 2904-24 24 volt Automatic 3-stage on-board battery charger. I have removed the joystick...
3
5 k
Slowpoke |
question
Hb-25 Ramping
I need some help on something. I have two Parallax HB-25 motor controllers. I have been working on getting them to start and stop smoother. They right now are jerky in starting and stopping. I contacted Parallax customer service with my problem. I am using an EZ-Bv4 microcontroller to drive the HBs. Here is my question and answer from Parallax: I...
3
3 k
Ellis |
release
Android/Windows Release 2015.01.18.00
Synthiam ARC EZ-Builder update: easier JD assembly, EZ-Bit sync, mobile slider fix, safer ultrasonic defaults, improved mobile editor & 3D lighting
1
4 k
jdebay |