All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Azure TTS for ARC robots: generate natural, customizable neural voices for companion, educational, assistive, and entertainment applications.
Featured
Sculpture inspired by Asimov's I, Robot explores robots protecting humanity; face-tablet shows human faces and clips of war, pollution and decay.
robot
Xsivejeff's I'm Building A Version Of The
Six robot with rotating dome, integrated pan-tilt camera and ultrasonic distance sensing-R2D2-inspired design with six legs.
0
2 k
xsivejeff |
question
Connecting An External Speaker To The Ez-B V4?
Hi, I wonder if it is possible to connect an external speaker to the ez-b v4? Maybe even a stereo speaker or 5.1 system?
6
3 k
Andy Roid |
robot
Aidan9419's A Robot That Can Dive Under At
Robotic submarine diving 50+ feet with onboard camera and powerful LEDs for underwater exploration.
0
2 k
aidan9419 |
robot
Youngj's My Daughter Wants To Build A R
Build a robot to play with and entertain a pet rabbit and optionally assist with cleaning its cage.
0
2 k
youngj |
question
Driving Stepper Motors With Ezb V4
Done a lot of looking on the forum and still can't figure it out. I am building a pretty heavy duty robot and want to use the power of stepper motors. Question is - how do I interface the stepper motor with the EZB? I have Kollmoren P22 stepper motor - 8 wires, capable of bipolar, unipolar and parallel operation. I guess I need a recommended drive...
4
3 k
castlephelps |
question
Connecting Leds To The Ez-B V4
Hi, I am just taking my first steps with my ez-b v4. I would like to connect some LEDs to the ez-b v4. Maybe some colorful ones that light permanently and an LED that can switch colors? (RGB-LED?) Which LEDs would be good for this little project? I already have a package with LEDs and resistors, but I am not sure if I can use them for this:...
10
4 k
sucipher |
question
Dc Motors For The Ez-B V4
i want to buy the ez-b v4 develepor kit to build a robot. but want to know if the ez-b v4 can handle dc motors. if it can't, how could you make it so it could?
4
2 k
dederdegamerta… |
question
Slow Performance
When I do a benchmark test of the Read 300 ADC I get a result of 5 reads per second. I know it use to be around 65. I thought it was because of the "Limited" WiFi message, but...
83
9 k
DJ Sures |
release
Windows Release 2015.12.19.00
Prevent camera auto-start in projects: require manual Start Camera, add Sharpen filter, and Connection Control flood protection for ez-B v4.
1
4 k
Dunning-Kruger |
question
Servo Profile In Lessons
I was about to post a few tips on starting to build and use the Six robot in one of the threads (since I just put one together) when I realized the Servo Profile step was missing from the lesson steps. Looking around, the only references to it I found had to do with JD and a couple having to do with loading one from mobile apps. In the lesson steps...
4
3 k
DJ Sures |
question
New Six Camera Failed After A Few Minutes Of Use
I just got a new Brookstone SIX. After assembly, I was starting to use it, and the camera suddenly stopped working with this...
16
5 k
WBS00001 |
question
Master Control Unit For Omnibot 2000
hello all, I have to search a remote control up and running for my robot OMNIBOT 2000 impossible to find one on ebay, no one sells? Is that-among quelquin you have a sell me? or moin indicated pourais or I buy one. thank you sincerely eric
0
2 k
bernard eric |