All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Compact Lynxmotion Smart Servos with position feedback, safety features and UART TX/RX for Arduino/EZ-B v4; scriptable temp, load, load-dir and ping.
Featured
Finley robot with EZ-B v3: 12 servos, PING sonar, camera, grippers, built to pick up objects and integrate with Synthiam ARC for interactivity
question
I've Started To Work On Mapping Using The Vx-11 Lidar
The boards have been pretty quiet so I thought I would share what I am working on now. This is for robots using an on-board computer I have started making a plugin that is designed to use the xv-11 sensor, wheel radius and encoder counts per revolution of the wheels to make a map of the environment. It also uses the compass part of the 4-in-1...
52
11 k
ZebraStripes |
question
Question Editing Frames
I get a "unhandled exception" error whenever I try to edit frames. I am using a six with claw robot. I can see all the servos in the settings but error occurs when...
11
3 k
surfcrs |
question
ARC For Windows
I try to run the ARC for Windows using Parallells Desktop in a iMac. After downloading, I get error message like the attached image. Can anyone help please? confused Lennart
5
2 k
Lennart |
question
Executing Functions At Certain Times Of The Day
Depending on the time of the day, I want my robot to do one thing or a different thing. I cant figure the logic out to make something like below to happen. I am hoping someone can give me some hints. Here is my script If ($time > "9:30:00" and $time "16:00"00" and $time < "09:30:00") print("to the other...
6
3 k
dbeard |
question
Serial Port Monitor On Ez-B's Bluetooth Port ?
Saturday, 2 February 2013 Good Morning EZ-Robot Community ! HHD Software has a Serial Port Monitor that I used to Monitor & Record the communication to my iRobot Roomba via an RS-232 Tether Cable. https://www.serial-port-monitor.com/ Does anyone have any success with any Serial Port Monitors for EZ-B's Bluetooth Serial Port ? Mine is on (COM3)...
1
3 k
AlexxGreen |
robot
Ahmad783's Good Day,I Would Like To A
Coffee-shop robot taking tablet orders and brewing drinks, innovative design ideas for research and service environments.
0
2 k
Ahmad783 |
question
Servo Resolution Of Movement Question
@DJ_Sures I know that you can send a fractional degree to a servo via the Servo() instruction, for example 60.379. But, does the servo really move to 60.379 degrees or is the actual movement rounded down to 60? If it does move to a fractional degree, what is the resolution to which it can be set? Thanks.
6
3 k
thetechguru |
robot
Dinesh's How About A Robot That Can Sav
Rescue robot to save children from wells and ground gaps, steel-strong chassis with thermal sensors to detect human heat signatures.
0
2 k
Dinesh.kra |
blog
Maker Spotlight: DJ Sures
Customize your development environment and instantly share your app to a mobile device to use as a controller.
0
623
question
Relationship Between Master And Slave Servo Positions
I'm experimentig the interesting relative servos function, and I don't understand the mathematical relationship between master and slave servo positions . Can some ezb expert write some equation or a flow-chart describing what the position of slave servos will be, in function of the master servo position ? considering that each servo has its...
8
4 k
leonardo46 |
question
Control Layout
They should make a barboard attachment because I have a great idea for some cool robot controllers so when I get the chance to I'll post what the controls will look like
1
2 k
DJ Sures |
question
Mobile App Capabilities , Input From Users And Makers?
Hello All, other than using the 6 app I really have not done much with the mobile app. I really wanted to ask how capable the mobile app is and what features are included / excluded. Also does it run scripts in an automated fashion. I do have a few tablets but before I break them open I need to know if they are suitable to automated tasks rather...
2
2 k
jstarne1 |