All Community Content

Inmoov Servos

I am moving away from MRL to EZB for my Inmoov. I have the entire robot wit all the arduinos etc working at a basic level. I seem to be constantly stuck with too many things with MRL. So I did get an EZB and have toyed with it with a couple of servos. I am really happy with the simpler interface etc. Before I hook up any more servos, Can someone...

Smoking Servo

New to the forum and robotics I've searched but not found something to my specific issue. I've Just received a brand new Developer Kit - one of my continuous rotation servos attached to d1 on a EZ-b v4 continuously rotated then started smoking and went red hot. At the time I was just setting up, so I had one HD servo plugged into D0 but nothing...

Power Connection Ezb

My Rad 1.0 project robot is nearly completed but have one serious question about causing power damage to either the 4 wire H bridge pwm or the EZB_4. After completion of successfully wire soldering to original rad 6 volt motors to H Bridge which is sharing the same dual 7.2 Nimh battery packs with Ezb_4, I also rewired the original Rad wires and...

Tutorial Update Questions

It was noticed that the Arduino sketch I put in the Neopixal tutorial wasn't working. https://synthiam.com/Tutorials/UserTutorials/150/1 I have tried to edit it so it will work, however, I can't add a missing line that has somehow gone missing from the sketch. In the sketch there is a line that should read; #include <Adafruit_NeoPixel.h> I...

Ez-B V3

Hello, I bought the EZ-b robot kit many moons ago (approx 5yrs), The v3, yes I know it's discontinued ?? Life has been chaotic and my robot project has been slow in the making. Long story short, I can't find the documents that came with it, so I don't have the Bluetooth password. Please help! EZ-B V3

Ezb Formula Race Car?

I was thinking about getting this 8 year old Giant race car to work with my Lap top,it is huge about the size of my kitchen table and really,really fast,needs a huge empty parking lot to use with Radio control but thinking how neat it would be to watch Live video and drive it with cell phone app or Lap top.Has anyone done this and is the EZB camera...

We Made The Local Paper

Just my small town paper (population 130k - ish) but a pretty good article. And I made sure that EZ-Robot was mentioned. iRobot in my local paper

Virtual Programming

We would really like the ability to program a virtual JD robot so that we can preview the behaviours prior to connecting to the robot. This would enable a whole class to participate. While we can buy 10 robots, we cannot get enough to satisfy the 30+ kids working in pairs.

Display Popup Not Working

I just try things because I see it. This caught me by surprise . First video. It should at least work with the auto entered example. First fail mode Tried to figure out how it worked in fail 2 Fail mode 2 That is enough for now, Good Night.