All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
XInput joystick skill for ARC: maps Xbox controllers to movement, servos, triggers, vibration, variables; supports analog inputs and scripts.
Featured
Control Johnny 5 replica with EZ-B controller - easy starting point for testing and learning robot control and features.
question
Iotiny Firmware Upgrade Yes Or No ?
@DJ, First time with Iotiny ... firmware versions: Iotiny Firmware update tool: Iotiny reports: Questions: 1) Should i upgrade the Iotiny with an...
7
3 k
DJ Sures |
question
Lidar Lite V3
Garmin releasing the Lidar Lite v3 now with PWM and I2C.
2
4 k
faengelm |
question
Need Help To Sync 2 Rgb Led Robot Eyes
Hi everyone, getting leds to work with the ezb4 was a breeze, but getting them to work together in sync has been a tiny battle. I got them...
6
3 k
Toyhackrobotic… |
question
How Do I Set Servo Limits
Hi, How can I set the limits for a set of servos prior to the rest of the system initializing? While using the autoposition window it initializes with the servos set to 90 deg. That breaks some servos for me. So I created a frame called 'rest' which I try to set first. Even then, I can move the servos beyond their limits in the autoposition window...
5
3 k
Perry_S |
blog
Advanced Education Partners With EZ-Robot To Bring AI-Enhanced Learning To The Classroom
Education Bundles introduce educators to the...
0
702
question
Bad Servo
Received my JD Humanoid Kit today and assembled it it. To my dismay I found a bad upper leg servo. Know it is bad , as I checked the wiring and then replaced the servo with one from my new Six Hexapod kit. It now works fine. I think the bad servo is mechanically bound, as unconnected you cannot move it. Powered up it gets warm, but does not move....
3
2 k
slickfix |
question
Replika Ai Might Be A Fun Thing To Check
Hey guys, I just stumbled upon this...it's also being talked about in the WIRED clip I linked, check it out, enjoy! https://replika.ai/
0
3 k
Mickey666Maus |
robot
Skyhawk's I Am A Robotic Design Engineer
Build a robotic AT-AT to teach students servo, stepper and linear actuator control on the world's coolest platform, inspiring graduates.
0
810
Skyhawk |
question
Kudos On Shipping Speed
I placed my order on a Wednesday and received the items by the following Monday. Very nice.
12
4 k
Steve S |
question
Screeching Ezb V4
Hi, have just unpackaged a brand new JD procured for our library education programme through State Library of Queensland, Australia. Upon switch on, the EZ-B v4 cycles through it's lights and gets to the flashing blue as normal, but all the time makes a high pitched squealing/ screeching sound, which does not cease. There is no normal start up...
2
2 k
Toyhackrobotic… |
question
Microsoft Emotion And Face Api Plugin Too?
@DJ Thanks so much for the other MS API plugins... Cognitive vision works pretty good... I was wondering (and not to get greedy or anything) but would it be possible to create an Emotion and Face plugin as well?.... These api's are fantastic and add so much extra vision functionality to ARC... But If not, again thanks for what you have done so...
9
4 k
Toyhackrobotic… |
question
Power - Not Working - 3D Printed Six Robot
Hello All, I am building my own Six robot with 3D printed parts and MG996R servos. I have sadly run into some issues. First off is a power issue from what I believe. I am using a 6xAA battery pack to run my robot. The total amount of power it is delivering is 7.4 - 7.8 volts and 15 - 16 amps. Am I giving too many amps? When all 12 servos are...
2
2 k
ohdj4 |