All Community Content
Experience early access to the latest features and updates. You'll have everything that is needed to unleash your robot's potential.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
Overlay translucent PNG targets onto a camera stream with loadable templates, attach/detach control, preview and status for visual alignment.
Featured
3D-printed male/female servo spacers extend JD by 2.75 inches, increasing leg reach and dramatically boosting speed with longer steps.
question
Bumper Contact Switch Scripting
What is the best way to add a home made bumper contact sensor/switch as my sonar is not quite enough to avoid certain obstacles,is there a simple script example I could follow for a contact switch?
12
3 k
RoboHappy |
question
Shorted Out EZB
Hey Guys, Well it seems I'm having a couple of days of stupidity...because I appear to have damaged one of my EZB v4. I was connecting the UART cable to an Arduino and stupidly connected it...
8
2 k
Dave Schulpius |
question
Hey Guys Any Way To Convert This Arduino Script Into The Ezb V4 Platform?
There is a company in india making these awesome cheap boards (way cheaper...
10
2 k
animator28 |
question
Old Boring Hardware You've Seen Before
Old stuff coming our way..... arduino.cc/pro And this is a nice old 12 bit servo driver https://www.adafruit.com/product/815 ...and lets...
15
3 k
nallycat |
robot
Thetechnomanc3r's Humanoid Robotic Hand Mk2 By The Technomanc3r
Custom robotic hand with DIY linear actuators using standard servos, Arduino control,...
25
6 k
nallycat |
question
Autoposition Changes All Servospeeds
Hi In my InMoov project i have some movements that I am trying to do at different speeds occasionally. In this instance, I want to move the head...
13
2 k
DJ Sures |
live hack
Raspberry Pi Hacking Atari 2600
Emulate Atari 2600 on RetroPie using Arduino HID to mimic joysticks, paddles and switches; Raspberry Pi emulation and Synthiam community hacks.
9
7 k
eran_p |
question
Absolute Beginner Guide To Controlling A Single Servo
Hi, I finally got my power supply and powered up my EZ-Robot EZ-B v4 board today. I have managed to connect to it via wifi but after that I am completely lost. I have searched for and attempted tutorials on site but the tutorials always seem to assume you know certain things and therefore appear to have crucial steps and information ommitted....
4
2 k
EzAng |
question
Cant Get Smooth Motions
i bin trying to make smooth motions,but i am not able to do. there are some setting missing or deleted ? its to slow or to fast.i also try the standard settings.
1
2 k
Nomad 6R |
question
Sound Servo (PC Speaker)
How do I centre my sound servo to 90 degrees? It is a horizontal servo for a head, set to move between 60 and 120 degrees but always moves to 60 degrees when audio has stopped playing.
2
2 k
DJ Sures |
question
Pwm Servos Movement Range
I'm using hitech pwm servos with ezbv4. The movement range is 180 or more, but ezb software doesn't allow the whole range. Can Synthiam make a plug-in for configuring the range as required ?
11
2 k
leonardo46 |
question
Midi Control Returns An Error
I have added the midi control. When i open configuration i have this error message. How can i fix this ? Version: 2020.01.05.00 System.MissingMethodException:...
6
2 k
EzAng |