All Community Content
ARC Pro is more than a tool; it's a creative playground for robot enthusiasts, where you can turn your wildest ideas into reality.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Sticker
People know your robot is capable when they see it is powered by Synthiam. These stickers are heavy duty for both indoor...
Recent Robot Skills
SSC-32 Servo Control…
Bridge ARC to Lynxmotion SSC-32: maps V0-V31 to SSC-32 channels for reliable, high-performance serial control...
Servo Recorder
Record and replay named servo movements with adjustable speed/direction (-5 to +5), multiple recordings,...
Openai Chatgpt
ChatGPT conversational AI for ARC robots-configurable personality, memory, image description, script...
Featured
Connects Ohmnilabs Telepresence robot's UP Board COM to ARC, enabling drive and servo control (neck V0) and integration with ARC cameras.
Featured
Basilio 45cm 3D-printed walking robot with 26 DOF, external potentiometers for pose capture, seeking EZB/EZ Robot integration for easier control.
general
Rock Pi X CMOS Battery Power
What are you guys that are using the Rock Pi X doing for standby power for the COMS when it's powered down? The system clock wont run without a 3 volt backup...
26
3 k
Dave Schulpius |
question
Raspberry Pi GPIO With Windows 10
Hello everyone; I'm curious regarding the use of on-board GPIO pins with regards to embedded PC's, such as the Raspberry Pi 3B I am using in my project that have ARC running on them. I am running ARC Teams on this Raspberry Pi to control other EZB's in the robot, and in order to shut the robot off properly, the Pi will need to send a shutdown...
1
978
DJ Sures |
general
I'm Going To Build An Inmoov, Any Advice?
Hello, Synthiam community! I'm going to need your help. I would like to build an inMoov for the first time. I want to take full advantage...
112
8 k
Nomad 6R |
general
Win 10 Performance Tips Needs Updating - Fully Disabling Win 10 Updates
I have a couple suggestions for fixes and additions to your tutorials on...
7
943
Dave Schulpius |
release
ARC 2022.08.24.00 (Runtime & Pro)
Synthiam ARC update: enhanced speech synthesis with editable audio effects and speed, saveable sound-effect configs, EZB/PWM fixes and Bing...
2
3 k
DJ Sures |
general
Anyone Built A Reachy (Telepresence Robot)?
Reachy is a telepresence robot project that is open source hardware and software. It is 3D printed (CC-BY-SA) So you can hack and...
4
4 k
Nink |
question
Inmoov Multiple Servo. My Power Supply Will Not Power My Servos
I am going to try to configure this robot using the EZ-B V4. I'm currently trying to power 6 servos for the right hand. The servos are MG996R, they require 6V. I purchase a power supply ( DROK 48V Power Supply, AC 110V/220V to DC 0-48V 10A 480W Buck Converter, Adjustable Variable LED Adapter Regulated 5V 12V 24V 30V 36V 48V Volt Voltage Transformer...
5
853
monterdur |
question
OK Can You Use A Raspberry PI Zero Webcam With ARC
My question is there a way to install a raspberry pi zero with a with a webcam on it and be able to connect to it with...
2
986
smiller29 |
general
Submitting A New Robot Project
I've got some new Synthiam robots I'd like to share, but every time I go to New Robot - Synthiam and enter in all the info and attach images and video links as stated are required and click Save and Publish, but the site just cycles back to it like it is still in edit mode or something with no warning selections highlighted for something I missed....
5
897
DJ Sures |
question
My Robot Is Too Loud.
Hey! I was testing my speech recognition and my robot won't respond to 'robot stop'. I know there's nothing wrong with the command because it recognized my speech when it was stationary but when it's rolling it seems to not pick up my voice over it's own motors. So how do I make them more quiet? Edit: I forgot to mention that I'm using a head set...
3
738
lmrobot |
question
4-1 Sensor
Hi everyone, have fitted an Ez-Robot 4-1 Orientation Sensor, went to calibrate and it disconnects from wi-fi? Never saw any readings from the variable watcher, tried different i2c ports with no...
8
3 k
Jeremie |
question
How Can You Fix The Camera Quality On Raspberry Pi 3B
How can you fix the camera Performance on raspberry pi 3B. I’m making a robot that tracks a red ball but because of the raspberry pi 3B’s GPU lagging it can’t process the ball. I did check the raspberry pi windows performance tips but with no changes in camera performance?
4
866
123345gom |