Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Adds a Personality Forge chatbot to ARC, giving memory, emotions, AIScript dialogue, persistent conversation IDs and speech/chat integration via API.
Featured
Wall‑E replica using EZ‑B v3 controller: wheel/arm/head servos, BlinkM eye, 2.4GHz camera, SparkFun MP3 trigger, 6V 3000mAh NiMH battery, PING...
question
Controlcommand(Scriptstart, ) Help
help guys. im trying to figure out how to activate a script by voice control.... i go to script, type in servo(d19, 30) servo(d19, 50) i hit repeat and name it shoot then in voice command or personality generator i type controlcommand(startscript, "shoot") ezb tells me shoot is not a valid wondows command..... what am i missing, cuz i...
5
2 k
hoolagen1 |
question
I See The Tomy Omnibot With Manuals And More
at EBAY going cheap,i got mine awhile back or i would get it ,it makes a great robot hack TOMY omnibot on ebay
13
4 k
robotmaker |
question
Powering Different Voltage Motors , Servos And Ezb From One Battery
Ok dc to dc converters can allow us to drop a battery voltage saaaay like a 7.2 v...
12
4 k
robotmaker |
question
How To Make A Low Cost 7.2 V Rechargeable Battery Pack
parts needed ,5 cell holder that comes with EZB,6 1.2 V 3000 MA ni-cad rechargeable batteries and 1 cell AA...
2
7 k
robotmaker |
question
Friday Night Chat - Come Join In! March 16Th
Friday Night Chat - Come Join In! Friday March 16, 2012 9pm EST - Eastern Standard Time This event repeats every week where...
10
3 k
hoolagen1 |
question
See Me.
Came across this and thought it might be of interest. See me in the mirror for the first time.
3
2 k
jstarne1 |
question
Servospeed
Hello, When I take a servo and test the speed control by it's self it works just fine however when I put it into a script with other servos it seems to just skip over the speed comands. Can I get a...
12
3 k
DJ Sures |
question
Need Suggestion On Using Ez-B Kit
Hey guys, I'm very excited waiting for my kit to arrive however after reading and watching the tutorial videos im still confused on how to get started....
7
3 k
Louis T |
question
Best Way / How To Make A Bump Or Contact Sensor
So how does everyone make bump sensors. Is like to have a second sensor so that if omni runs into the edge iof a table or...
8
3 k
robotmaker |
question
Looking For Omnibot 2000 Gears...Maybe Some Of You Dont Need Them Anymore
Hi there! I know there is some of you out there upgrading and rebuilding Tomys vintage Omnibot 2000. I am wondering if anyone of you have some parts and leftovers they dont plan on using anymore. I am especially looking for gears of the motorized arm and a circuit board to get my robot which I had picked up at a local fleamarket working again. I...
2
3 k
robotmaker |
question
Thank You Dj And Ez-B
I just wanted to say "thank you" to DJ. The EZ-B is truly revolutionary and brings a realization to many of us who have dreamed of building our own personal robots. This forum is also a blessing. I have never been more proud to be associated with a group of people who are so helpful and friendly. It is funny how so many, who are into...
4
3 k
Robotz012248 |
question
Does The Camera Have To Be Attached To The Servos That Move It
hello Had an idea, since my wall e has a bunch of servos and light in his eyes, i wont be able to install my ezb cam in the head.... i was wondering.... if set up the camera above my monitor (stationary, separate from my wall-e) and i assign the wall-e neck servos (neck left and right and neck up and down) to the camera will wall-e head move (as if...
4
3 k
hoolagen1 |