Robot Building Questions

Ez Robot Standard Servos

Hello I have a question about the standard servos in the EZ Robot Kit. I received the replacement servos that were originally bad. I understand that problems happen in every business, no fault here on EZ Robot side, and would just like to say, very impressed with how it was handled. Back to my question ... lol No sense in throwing a servo away so I...

Integrate Ez-B Dlls Into C++/Qt Application ?

Hi, I would like to use Qt, which is C++ based, to write an application for controlling our little robot. Does anyone have any experience, how to integrate the EZ-B .NET DLLs into Qt ? Or is there any other way how to do it (except changing the programming language, because we have a lot of tested/verified modules, which we would like to reuse) ?...

Memory For My Bot

Hello forum! Very new to robotics (first timer). I am awaiting my shipment of parts for my bot project. I want to use DC motors and need the positions that I set to be stored in a memory cache. I am a medical person by profession so not sure the lingo so sorry for that in advance. My bot will have simple commands left, right, up, down. Thanks for...

Ping Sensor Pegged At 255

OK, sorry to be such a numb nut here, but things haven't gone quite a smoothly as I had expected. No matter, I'm patient. So board, works, servos now work, however... I wired up the ping sensor, double and triple checked my wiring, however, under ping or radar, I get a pegged signal @ 255. Any ideas?

How Do I Make A Servo Move Up And Down In A Continous Motion??

I want to make Wall-E head move up and down but in a continuous motion using script, is this possible? that is the servo is not jumping from specified servo position to another and skipping all the in between positions, sort of like how you would slide the servo control slider up and down. Is this even possible using script? I want to create some...

Suggestion: Add Text Search Box In Script Help Window

I want to suggest adding a text search box at the top right of the Script Help window or add support for Control + F for text search. This will make it a lot easier to find the function you're looking for by entering a search term and press enter, much better than scrolling thru the list if you already know what you want and just need the command...

Can The Ez B Do This

I've got a light control board that will send different light patterns to 10 number 47 incandescent light bulbs. To activate the patterns I need to ground 1 of the header pins on the board. The pattern will stop when the ground is removed. There are 2 rows of headder pins. 1 row is ground and the other activates each pattern. I can use a simple...

Question With Connection After Successful Firmware Upgrade

Upgrade of firmware was successful with note to restart. I unplugged the power and plugged and after this, blue led slowly fading and again light on still around, red is blinking without the possibility to connect to the free COM7, which i used for firmware upgrade. I see the EZ-Robot as BT Device, but I am not able to connect. Thanks for your...