Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Real-time 2D mapping from Neato XV-11 360° LIDAR via GetSurreal controller; exports $LIDARDistance/$LIDARIntensity, configurable angles, color, zoom.
Featured
Inventor/roboticist studio features an Alexa-controlled Dewey Drone aboard the Space Freighter Valley Forge diorama from the 1972 film Silent Running
question
I Have Ye To Get My Stuff
i have ye to get my stuff i orderd it like 3 weeks a go whats going on can sum one help
4
2 k
spidermax96 |
question
For D.J. About Speech Recognition
Hey! The Speech Recognition part of the EZB works better than ANY I have ever seen. Even better than Dragon Dictate, in my opinion. But, I want to ask you if there is a limit to the NUMBER of phrases you can put in the Speech Rec program. I notice that when I first start off, it works fine. But, after a while I loose those capabilities. It is just...
2
2 k
MovieMaker |
question
Strange Happenings
I have many many scripts in the Script Manager. When I call on them from another script , it sometimes tells me that there is no window named by that script. But, it is IN the script manager and created. I create another window by the same name and it runs the script in the script manager. But, if I change the second script that I created, it still...
3
2 k
DJ Sures |
question
Relative Tracking Within A Script Woes
Hello Gang, I tried to use relative tracking, within a script. It does not drive the motors that are in the modified servo movement panel The...
2
3 k
DJ Sures |
question
Obstical Course
www.dump.com/robotmaneuver/ This thing needs an EZ-B
0
2 k
Bookmaker |
question
Ez Kit Questions
I don't think it's appropriate to post this here but when I tried under "Contact Us" I have gotten no response in 4 days. I tried to contact you again through Contact Us under Technical but got this " Warning: Technical Support? As stated above, sadly the EZ-Robot staff will not be able to assist with technical questions over email...
23
5 k
WMoecke |
question
Removing The Ic
Folks, I need to replace the IC on my EZB. I received a replacement chip, and I assumed I would need to you an IC "puller". However, I don't own one, and before I make the run to a...
3
2 k
jstarne1 |
question
Project Program Code
I am working on a ar drone parrot using camera device, ar drone control panel in which window can I see the codes of tracking color camera
2
2 k
DJ Sures |
question
H-Bridge Dual Dc Motor Controller
Hi, I got my H-Bridge from Ez. I'm playing with tutorial 43 working with the HBridge. I can not get my robot to move. The H-Bridge work fine using Ez...
7
3 k
rgadagno |
question
Serial Gps, Wired
Hi I'd like to connect a wired serial GPS to my EZ board (got the GPS Module PMB-648: https://learn.parallax.com/kickstart/28500). Is far as I understand it isn't yet possible to read a series of data/text/chars via the digital port and setting the read baud rate. Am I right? Anders P.
2
2 k
Anders.Plovgaa… |
question
Let's Talk About Navigation
Have any of you gotten your robots to Navigate flawlessly without running into the tables,chairs,etc. ? If so, what tips do you have to offer? There MUST be a good Navigation Algorithm out there. On small robots, this seems to be easier. But, on large ones it can be disastrous. I would like for us all to talk about our experiences with this problem...
4
3 k
MovieMaker |
question
Motor And Potentiometer Script Help
I had this script working in ARC with only one board. I added a second board and added a 1. to the beginning of each command in the scripts but now I cant get the ports to turn of or on. I also get Syntax errors after I've run the scrip a few times and (I dont think) I made any changes. I also added the .1 in the call scripts "move right"...
2
3 k
Dave Schulpius |