Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
EZB v4-Arduino I2C bridge for ARC: supports custom C# code and reads gamepad or Wii controller inputs for robot control
Featured
3D-printed Big NallyCat (OpenCat variant) using PET-g for durable, low-infill parts; planning full-size servos for camera/sensors; controller pending
question
Dc Motor And Continuous Servos
Why do you guys from EZ Robot ship the EZB with Continuous Servos instead of DC Motors and H Bridges?
2
2 k
jstarne1 |
question
Error. This Computer Culture Has Its Seperator Set To '.'
Error. This computer culture has its seperator set to ',' this setting needs to be set to . for all EZB robot software to work. ? Really? Why cant i keep my comma as seperator ? Thats normal in my country.. . And why am i forced to update anyway, it worked fine before. . Im always scared an update in the future will eventually render my EZB...
2
2 k
SnowWolf |
question
I Hear The Leap Motion Is Comming Out In May
I woulder if there will be a interface to EZB soon,from what i see it might be used to drive cars and more ,and selling at bestbuy...
6
2 k
robotmaker |
question
Vertical Servo Question
Hi, i'm have a bit of problem with the vertical motion of my servo.i am using an DAGU Pan and Tilt Kit with mini Servos, i have the horizontal working fine and have it tracking me around the room with the camera and everything works apart from when i try and get it to track something vertical. it kind of nodes up and down like it's fighting it's...
11
3 k
51m0n76 |
question
Omnibot Project:
I put the letter H in hack! Here is the Omnibot I've been working on for the past couple of months. Both arms, the left wrist, and the left hand have servos in them. The battery tray in...
12
5 k
captor03 |
question
Updated ARC & Settings Gone
I just updated to the latest ARC and it seems all of the settings for the servos have been reset to port N/A and the min/max limits removed. This is how it was...
2
3 k
Rich |
question
Ir Autonomous Home Base
have 2 ir recievers from my wall-e project. Looking to make a cheap/nearly free home base ir reciever. Could they be hacked up to work with the ez-b and my laptop(and...
26
6 k
CardboardHacke… |
question
Ive Notice Something Wierd
has anyone have this happen , after shutting down the power to ezb board .then power up again . when seems good i give command to look home .and servos move fast in...
25
6 k
csa459 |
question
Tethercell: Control Battery
I LOVE this this is a great idea and vary handy Click To Watch Video Tethercell
3
3 k
Wolfie |
question
Label Printer
Hi All. Is there a way that the EZ B can control this USB label printer? https://global.dymo.com/enAU/ProductSpecs/LabelWriter_450_Turbo.html Thanks in advance, Frank
10
3 k
Rich |
question
Speech Recognition In Other Countrys
Hello robot designers from other countrys, I am from Germany and for the past 9 months have not the speech recognition at the EZ-B get to work. I...
15
4 k
R2D2 |
question
H-Bridge
Dont know if its the right forum... But would this H-Bridge: https://www.ebay.de/itm/Neu-L298N-Dual-H-Bridge-DC-Stepper-Motor-Treiber-Controller-Board-Modul-module-/251176679294?pt=Elektromechanische_Bauelemente&hash=item3a7b4bf77e fit with the the ezb, driving the omnibot 5402 standard-motors? Thanx, Chris confused
2
2 k
sysop 9009 |