Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
Add custom EZ-Script functions in C# or JS; intercept unknown calls, parse parameters and return values via AdditionalFunctionEvent.
Featured
Control Arduino RGB LEDs via Synthiam ARC serial monitor with Python code; ask a color and watch R G B light up.
question
Need Help In Making Garden-Bot Work Outside In The Weather.
This is garden-bot my latest robot project. I need help in making garden-bot work outside in the...
15
5 k
jdebay |
question
Yahoo! The Revolution Has Started
PRE-ORDERS NOW AVAILABLE. YOU CAN PRE-ORDER ANY OF THE ROBOTS.
2
2 k
Rich |
question
Heavy Duty Motors.
I am interested in building an Omnibot 2000 or Omnibot 3000 from the scrap... Using fiberglass... But I would like to know which motors shall I use to bear the weight (about 12-15 Kgs)...
19
4 k
pranav |
question
Wireless Camera Driver
Hi Everyone, Right now I have a very old lappy which runs on Windows XP... So it can't install drivers on its own.. I need the driver of the wireless camera that comes with the EZ-kit.. Can any one guide me please...
7
3 k
pranav |
question
Using ARC Behind A Proxy And Firewall
Our school uses a Proxy Server that requires authentication to access.... I would guess that most schools do the same. DJ I have started this thread so I can get our schools technical support involved in this one. They should join this thread sometime soon.
4
3 k
Tameion |
question
What Capacitor Is It?
Yesterday when I was looking at my EZ-B, I observed a new kind of Capacitor in the place C1 of EZ-B... I have known about electrolytic capacitors and ceramic capacitors.. What...
3
2 k
oliver82 |
question
Ultrasonic Distance Sensor
How do you connect the Ultrasonic Distance Sensor without losing servos. and How do you set up the robot to run on its own using the Ultrasonic Distance Sensor to keep...
8
3 k
jfew |
question
Can I Do This With Ez Robot?
What I want to do is the following - Encapsulated programs that will control motors and select voice files to be played. The programs will be randomly selected to...
8
3 k
Dave Schulpius |
question
Omnibot On Ebay - Might Be A Bargain
Here is an Omnibot auction on ebay - includes a Chatbot: 121174248933
0
2 k
MikeDC |
question
Using Multiple Ez-B
I see a number of people here using multiple EZ-B on their robots, if the reason is just running out of port lines and number of servos etc, then there is a really good alternative. Many moons ago, long before the dawning of the EZ-B, the first AIMEC:3 used the SD20 (I2C 20 channel servo driver) chip www.robot-electronics.co.uk/htm/sd20tech.htm...
7
4 k
Dave Schulpius |
question
I2c Query
Hi folks, I have another I2C query. I've learned now that I2C devices have addresses meaning multiple devices can be attached. This is awesome of course. My question is now, if I had, say 2 accelerometer's of the same type attached, can these be accessed separately? Am I correct in thinking that they would have the same address code? For scripting...
5
2 k
Rich |
question
Expanding Digitalports
I was wondering if anyone had a simple solution for adding more digital connections to the controller. One idea I had was to link an arduino to it via i2c, although I don't know where to start to do that. I need to increase the connections by about 6 ( making 26 ) minimum.
12
3 k
Rich |