Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
Telnet-like ASCII TCP client for ARC: connect to IP:port, send ASCII, view raw or HEX server responses with local echo
Featured
Control Philo Junior with Synthiam ARC camera 'Track By Relative Position' and WiiMote for simple, cost-effective, user-friendly robot control.
question
Robot Ideas
hi all, i have a few upcoming ideas for the revolution (2 new robots to make), but there are a few problems: what are the measurements of the ez-bit connectors, also my google sketchup skills are...
11
4 k
jstarne1 |
question
Wild Thumper Street / Indoor Tire Conversion 4Wd Or 6Wd
Hey guys sharing this for anyone who wants or has a wild thumper that you can make it a little more indoor...
2
4 k
jstarne1 |
question
Omnibot-Like Candy Dispensing Robot
Here's a robot I found while browsing the internet, it looks remarkably similar to an omnibot. Though it's not ran by an EZ-B, it shouldn't be hard at...
6
3 k
MovieMaker |
question
Spec Sheet
This thread synthiam.com/Community/Questions/4570 made me wonder if there is a spec sheet showing min/max voltages, current (per pin as well as overall for the board) etc on the new EZ-B pins / power...
9
3 k
CardboardHacke… |
question
Sensor Feedback Indicators
In my introduction post I mentioned I was using TouchOSC to map back the LED on/off state to my control via an Ipod. The reason I am using that is because it was a easy...
2
3 k
Rich |
question
How To Add Robot Image On Auto Positioner?
I'm using an Iconia W3, and I can't seem to find the button to add your own custom robot image, and I can't drag or add more than 1 servo. Weird. I haven't tried it on my laptop yet, but is this a tablet issue? I'm sure there's a simple answer to this, thanks in advance.
9
3 k
Doombot |
question
A Short Introduction
I figured I would introduce myself. I started about 6 months ago with robotics using a BOE kit and Arduino. I wanted to do facial recognition so played around a bit with opencv and C#. During my research I ended up on the EZ-Robot site. Since I liked what I saw and the community seems friendly and helpful I ordered the developers kit and I am...
7
3 k
Robot Doc |
question
Possible Dumb Question On Ezb 4 I/O Pin Power Limit
Ok, so I have yet to use an EZB controller, so this may be a seriously dumb question.... I did a quick search (read...
9
4 k
Dunning-Kruger |
question
Question For Jstarne1.
Hey Josh, I while back ago I was reading a lot of info about the history of robotics and such. I tend to just cram tons of info into my head so I can't sight the source and I...
13
4 k
jstarne1 |
question
Ez-B V4 Pic
This is a great looking board! I can't wait!
9
3 k
Troy |
question
Ez Wallpaper / My Wallpaper Setting
I noticed in the Options-Preferences section there is a check box to "Display EZ Wallpaper". When using my own wallpaper image as set in the Project-Details section what happens if this box is checked? I did have it checked with my own wallpaper set and as ARC was starting up I did see the EZ Wallpaper appear for a second only to be...
2
3 k
Dave Schulpius |
question
What If There Was An Ezb Pro? What Would It Have?
Ok this is just to kick around ideas but what if you could buy a ready to go kit to trick out your EZB V3? I have a few ideas myself but I want feedback 1.-Built in wifi 2.4 ghz option for long range / networking 2.-a plexiglass case consisting of a base 1/4" plexi, standoffs and 1/4" plexi cover to protect ezb and wiring 3.-a servo wire...
22
5 k
DJ Sures |