Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
Real-time servo position input via Arduino ADC over I2C; supports Nano (6 channels) or Mega (16), configurable I2C address and scalable chaining.
Featured
Control EZ-B robots with a Weather Underground API handler: fetch forecasts, speak templates, map variables, and run ezbscript commands on update.
question
Bought Rc Wall-E Without Remote, Is There Any Other Way To Control It?
Hi guys, I just bought a remote control WALL-E robot known as the "U...
2
10 k
Rich |
question
May Have Missed This.
Is ARC now supporting microsoft kinect? Thanks Chris
1
2 k
Rich |
question
Lego To Ez-Bits Adapters
hi all, i just created a lego to male ez-bit adapter and lego to female ez-bit adapter. they are currently awaiting the check for being approved, and if you want to have them earlier, here are the .stl files of them. lego to ez-bit adapters download have fun building!
4
2 k
DJ Sures |
question
Camera Connection With Ez-B V4
Hello I have to ask about the camera wifi connection, because untill now (V3) it has been connected via separated wifi builded in camera and for the computer you needed additional stick. Is it possible that Ez-b V4 will have wifi for video streaming from camera as well? If yes, so can I connect the camera which I bought in this year or I have to...
5
3 k
fisha |
question
Voltage Regulator For Servos
I need to provide external power for the servos as I'm using a lot of them. Can any one suggest any voltage regulator for the external supply of voltage and how do...
49
15 k
pranav |
question
Female Ez-Clip
I would like to see a female EZ-Clip on a square base (or some kind of base) with 4 screw holes so each easy to attach other EZ-bit components to custom robots for example the arms or head.
7
3 k
jstarne1 |
question
Downloading From Ez Cloud
When I download my saved project into ARC from EZ Cloud into my already opened project it will combine both projects so have double of the same controls. Is this normal? I seem to remember doing this a few months ago and instead of merging both projects it would close the opened project before opening the downloaded one from EZ Cloud. However I...
5
3 k
Dave Schulpius |
question
Rover 5 Chassis Question
I am thinking that the Rover 5 chassis in the store does not come with encoders due to the price. Is that correct?
8
3 k
Darathian |
question
Hey! The Omnibot Is Spotted In 2011
Just found this article. DJ? www.avenuecalgary.com/blogs/supposed
4
2 k
Alan |
question
Built In Speaker Module Questions
this one is mostly aimed at @DJ , and my question is: is there a option where you can plug in a seperate amplifier with speaker for the built in sound...
4
2 k
Jeremie |
question
Are The Ez Bits In The Store 3D Printed
Are the robots and ez bits in the store being 3d printed or bulk manufactured like injection molding. I only ask after noticing there are now three makerbots in the engineering area glowing at night. - Josh
7
3 k
jstarne1 |
question
Beginner To Novice Tutorials At Sparkfun
I grant you that this isn't my tutorial but rather a reference to tutorials. That being said, here ya go. ---- I was poking around the SparkFun.com website and took a little time looking at what they have in the tutorials section. Quite a lot of it is illustrated well for beginners to novice. I thought I'd share this with our newer members but it's...
6
3 k
Robot Doc |