Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
Play live web video and audio streams inside ARC from Chrome/Firefox, streaming directly to ARC camera control; network configuration may be needed.
Featured
EZ-B Vision color-tracking test robot by DJ Sures tracks and follows colored objects with a camera head; modified toy shell and servos.
question
No Servo Control
Evening All This question is somewhat related to my earlier one on servo values. I have a 12 volt servo that I'm unable to get any control over. My port is set, my grounds are connected,...
6
2 k
Nomad 6R |
question
Doctor Who Dalek Eye Stalk Flashlight
For those who might want to build their very own Dalek, here is a flashlight that you can use as an eye stalk. Dimensions: 9.6" long Eye...
4
3 k
Dave Schulpius |
question
My Bot Scraps
My Bot Scraps is starting to get a cool look
25
5 k
irobot58 |
question
New To This ;)
Hi all, I'm new to this forum and new to building robots. Got some inspiration from DJ Sures 1980's Omnibot build. I've got myself a EZ-B v3 control board and an old omnibot but was wondering...
65
8 k
Rich |
question
Digole Digital Solutions Lcd Displays
There are a lot of different LCD Displays out there and a lot of them can be tricky to get working. All of them require some sort of backback...
12
11 k
Rich |
question
Makerbot Replicator 2 Beginners Guide
I found this to be a good read for beginners getting into 3D Printing. It covers the Replicator 2 but also has lots of good information about 3D printing in general. The software portions of the article are a little out dated so refer to MakerBot's official guides for the most up to date software info....
1
3 k
Alan |
question
Hc Sr04 And Hc Sr05 Controller Board , Tester For Callibration
Not sure if your sensor is freaking out or you just need to test it's accuracy to see if you...
4
5 k
jstarne1 |
question
Ez Robot Projects Found On The Internet
I have found a few neat projects that never made it to the forum I wanted to share that use the EZ Robot kit. https://i.imgur.com/O4xi8UV.jpg https://i.imgur.com/Dp3U5xM.jpg https://i.imgur.com/jO8GfSa.jpg https://i.imgur.com/1Q68vF7.gif
9
4 k
Alan |
question
H Bridge Not Needed If Motor Not Reversed?
Hopefully this is straightforward. If I am NOT reversing a 12 volt motor but just turning it on then off then I don't need an H-Bridge,...
10
4 k
Dave Schulpius |
question
Reading A Second Echo To Identify Edges And Small Objects Sr04
I found this "tip" while researching setups from other robot projects and thought it...
6
3 k
PhG |
question
About Ez Robot Circuit
How to buy the ez robot complete kit.i search it but I find the developer kit it developer kit is complete kit.i need to be sure please
2
2 k
Rich |
question
Ez Script And The Camera
Has anyone wrote scripts that used info from the camera? I want to combine the movement and colour tracking into the script so the robot can figure out what it wants to follow. Like randomly choose to follow the black cat when it moves and not the white one when she moves. I am going to try and incorporate the ping sensor not for avoidance but to...
3
2 k
Rich |