Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
Tiny YOLOv3 CPU-only real-time object detection using a camera; offline detection, script-triggered on-changes or on-demand results with...
Featured
Test H-bridge ports using a servo connector: cut the red wire, use white as + and the short lead to ground to watch toggles
question
Ez-B V3
Where can I find the ez-b v3 ? Because it doesn't seam to have it in the store.
3
984
thetechguru |
question
For D.J. And Staff And Anyone Who Has A Replicator 2
Hey guys, I am doing research on the Replicator2. D.J., you mentioned using GLUE on the build table, what was the...
6
2 k
MovieMaker |
question
I Thought Up A (Possible) Way To Add Lower Voltage Servos!
So, in my last thread, (https://synthiam.com/Community/Questions/4816) you can see i have absolutely no...
7
3 k
Rich |
question
New Ez Robot Logo ?
I noticed a new logo sneak in. It's on the ezb case in the picture and now replaces the white biped robo and is in the upper left hand of the website. it's small , i tried blowing...
5
3 k
Antron007 |
question
Voice Recognition Programming
Hello, I was hoping someone could help me program my ez robotic arm to be compatible with voice commands. I have a microphone headset and a microphone on my laptop but I haven't been able to find any tutorial videos on how to do it. Can anyone help?
3
2 k
Martinl3 |
question
Can 7.4/6V Servos Be Fried By A 11V Battery?
My humanoid has a 11v battery, and i'm afraid that it might fry the 7.4/6v micro servos. Will this fry the servos?
27
8 k
Dave Schulpius |
question
Ez Robot Navigation?
Has any thing changed that might effect navigation on Community or EZ Robot? I found on my 8.1 windows makes me choose below the windows icon, unless the EZ message shows, no navigation? It started when the "ask us" help message appeared on EZ Robot? Steve S
6
3 k
Robot Doc |
question
8.1 Connection Question
After 8.1 windows update my com port changed from 5 to 3, but it connected. Today I decided to try processed video on my new pc. I charged the camera, plugged in the wireless camera dongle, but could not connect to EZB. After removing the cam dongle, I was able to connect. I installed the cam dongle and had processed for a short time (something I...
1
3 k
Steve S |
question
Brookstone Rover 2.0 Support
Can ARC support the brookstone rover 2.0? Really want to know cause i like newer.
4
3 k
Snayper |
question
Androbot Inc.
I had no idea the founder of Atari made a robot company in the early 80's. Here are some neat videos of Androbot - Topo and Bob
11
10 k
MovieMaker |
question
Connection With The Following Sensors/Addons
I wanted to know how one would connect the following to the EZB v4 1) Laser 2) Laser Module 3) RC Car https://hobbyhobby.com/store/product/349263/58034-1-10-Slash-2WD-SC-RTR-w-2.4/ 4) Digital Compass - Ankit
4
4 k
ankit1 |
question
Ez- Bits
Hello to all, I have been absent for some time but am back on board. I have my order in for the EZ-B V4. I have been looking for the STL files for EZ-Bits to no avail. I know they are in the software...
4
3 k
bookmaker32 |