Robot Building Questions
Synthiam Credit
Log In
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Synthiam Swag
See All Swag
Robot Sticker
Recent Robot Skills
View All
Autonomous AI
Autonomous AI robot skill for ARC: vision-based LLM control, speech, movement, animations, memory,...
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Featured
EZB UART parser and Serial-TCP bridge to connect EZ-Robot cameras via Teensy USB, enabling ARC camera control and USB-to-serial bridging.
Featured
Synthiam ARC makes coding Simone easy: openFembot humanoid AI featured on Servo Magazine with open-source hardware, software, and tutorials.
question
Slight Delay With Ezb Voice
Quick Question, Is it me or have you all noticed a slight delay with the SayEzB Voice. In other words, when the command is executed half or most of the words are not being spoken. Has anyone else seen this? Wayne
23
5 k
WayneA |
question
I See Boxes Of Robot Parts
More manufacturing samples? Revolution is getting so close I can taste it. Alan
12
4 k
DJ Sures |
question
Internet Icon In Taskbar
hi i am not able to get an icon in taskbar.i have win7. i cant find it.for the internet.
28
5 k
Nomad 6R |
question
Line Follower
anyone can give an idea how to deal with line follower in EZ-Robot?
8
3 k
yatakitombi |
question
Xl Rover Prototyping Community Feedback
ANT is doing a great job getting the first proto of the XLR6 ready to send to me to start working on so for the sake of planning I would like...
53
9 k
jstarne1 |
question
Not Enough Coffee
Good Afternoon, There is not enough coffee to keep me awake. So, I humbly bow down to EZ-Script and say, ugh, where can I get training on how to use. Gotta get the ideas out of my head and onto script to make things do what I want it to do!
6
3 k
WayneA |
question
Uartwrite Question?
Trying to send the below code via serial to my SSC-32 servo board to test servo movement... it gives me an error because $pw is greater than 255 (max for a byte which I do understand)... It's probably me not getting it, but how do I send numbers greater than 255? This is the error "Error on line 6: Value was either too large or too small for...
14
4 k
Dave Schulpius |
question
How To Edit Sounds Files For Use In Ez-Robot
Have you ever wanted to take a sound files and edit it so your robot can play it back? A nifty and free piece of software called...
7
4 k
Dave Schulpius |
question
Instructables Vintage Contest
I was on instructables today and noticed they're having a vintage contest. I was thinking that if people with vintage bots like b9 and johnny 5's and so forth could enter and blow away the other contestants. Contest page
4
2 k
jstarne1 |
question
Bypassing A Mini Push Button Switch
Hi there, I am looking at adding a cool lighting system to my new robot "Trakx" (creative I know), the lighting is similar to the under car...
27
13 k
Dunning-Kruger |
question
Question For Those Of You In The 3D Printing Community That Are Working With Ez-
I originally posted this in the wrong place so here we go. I have been racking my brain trying to figure out what is happening. I downloaded (about a dozen times) the EZ-Bits for the EZ-B3 card cover. The plate printed just fine. But, the cover had a perfect shape, but it was sooooo thin. Have any of you experienced this before? My 20mm cube prints...
10
4 k
MovieMaker |
question
Ez-Robot Camera : Grid Lines
Good Morning, Is there anyway to "save" the grid lines in the software? If I open and close my project, I have to re-adjust my grid lines to the position that I want. Thoughts? Wayne A
4
3 k
DJ Sures |