Robot Building Questions
Synthiam Credit
Log In
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Synthiam Swag
See All Swag
"I build robots" Hoodie
Recent Robot Skills
View All
Autonomous AI
Autonomous AI robot skill for ARC: vision-based LLM control, speech, movement, animations, memory,...
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Featured
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with hardware-timed PWM, external power and chainable boards.
Featured
Norm is a very fitting name, affirming its aptness and suitability.
question
Dynamixel Wires
just got my EZ-B today, and I really need some help can the dynamixel wires connect directly to the ez-b, and if so, which way do I put it in? there's no ground/power markers on the wire...
5
3 k
RobertL184 |
question
Glyph Detection Range
What is the average glyph detection range with the EZ-B v4 Camera?
9
4 k
jstarne1 |
question
Tiny Robot Learns To Fly A Real Plane
Tiny robot learns to fly a real plane jd could do this! www.cnet.com/news/tiny-robot-learns-to-fly-a-real-plane/ j
0
2 k
jdebay |
question
Bug? Report
when i follow the tutorial assemble ,some off the button dont work.
8
3 k
DJ Sures |
question
First Impressions Of Six
I received Six two days ago after having it on order for one year. I was glad to see it. It took my wife and I four hours to assemble Six. The assembly instructions were...
12
4 k
Nomad 6R |
question
Ezb3,4 To Arduino I2c
Hello EZ Robot community. I though since you guys have been so good to me in helping with information need, I would take some time to show you guys what I'm doing with my...
20
7 k
Antron007 |
question
Ezb-V3. Bluetooth Setup On Ver 16 Software
I have the ezb-v3 as well as the new ezb-v4 I am having a hard time getting ARC vers. 16. To work with the older ezb-v3 Bluetooth, plus I was using a tom Tom Bluetooth GPS to communicate with my original program. Thanks for any assistance. Mark A. Tadlock
3
2 k
JustinRatliff |
question
Cont Servo Question
I am sure this is someplace ( I can find it with search) I learning to use the tracking for ez v4 and I was wondering if is is possible to use the 360 servo to have cam track in a...
9
4 k
rb550f |
question
ARC Windows And Ezb V3
Hello, I have a EZ-B v3 but I'm not able to connect with the new software and can't find help on the forum; may I have a suggestion or an old version of the ARC download link? Thanks a lot!
4
2 k
sassone |
question
Ez-B 4 Stopped Working
Received my log awaited order. Glad it arrived. I contacted you as soon as I opened the box and found I was missing a camera and had a servo instead. I believe we have this straightened out and you are sending me my missing camera. I just got around to trying out my new EZ-B hardware and have found two additional problems with my order. One of the...
13
4 k
ITDEPT |
question
Questions About The Ez-B V4 Board Specs - Servos, Processors
I am looking at the published specs here: https://synthiam.com/Shop/AccessoriesDetails.aspx?prevCat=9&productNumber=40 Servos Voltage The servo compatibility is listed as "5V tolerant", but don't most servos run best at 6 - 7.2 volts? It was my understanding that 5V is under powering servos, if not almost so. Amperage Can the EZ-Bv4...
4
4 k
DJ Sures |
question
Shipping
I have waited patiently for the last TEN MONTHS, received nothing but boiler-plate promise responses to my queries about when my order will ship. My order was placed 04Nov2013 with a verbal promise that "all orders are expected to ship by 15Dec2015 and arrive prior to Christmas" I believe that EZ-Robot is a scam and this order will never...
26
5 k
Dave Schulpius |