MPU6050 Accelerometer Gyro Temperature icon MPU6050 Accelerometer Gyro Temperature Reads MPU6050 gyro, accelerometer and temperature via I2C, initializes and returns data on-demand to EZ-Script variables using ControlCommand RunOnce Try it →

Robot Building Questions

ARC Pro
Learn More
Upgrade to ARC Pro
ARC Pro will give you immediate updates and new features needed to unleash your robot's potential!
Synthiam Credit
Earn synthiam credit to lower synthiam product costs
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Log In to Earn Credit
Synthiam Swag
See All Swag
"I build robots" Hoodie

"I build robots" Hoodie

This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester...
View Product
Variable State Saver by Synthiam
Featured
Variable State Saver

Persist and auto-load specified global variables between ARC sessions for consistent, personalized robot behavior and quick state restoration.

This Robot I am calling NallyCat by nallycat
Featured
Robot By Nallycat

Synthiam ARC-compatible OpenCat quadruped build using MPU-6050 for stability, Thingiverse STL/Nibble parts, mini servos and HuaDuino controller

Community

Welcome to the Synthiam Robotics Community

Sign in to unlock your personalized community feed — browse your posts, track replies, follow discussions, and join the conversation.

Log In to Access Your Content
question
Working With Serial Terminal  & System Variables

Working With Serial Terminal & System Variables

I have a device that is sending information in on a serial port. I want to evaluate the incoming string then if it = a...
question
Connecting To Jd Questions

Connecting To Jd Questions

Thanks for all the help with battery charger. We have a new charger and it DID charge the battery. Now onto the next issue we are having. Whenever I try to connect my...
question
Roli Not Moving

Roli Not Moving

received roli the other day. went through the following steps: 1. unpacked everything and laid out on table. 2. verified all parts ordered were received and set up charging since it was a no...
question

Pc Soundboard Sound Wave Form

@DJ Sure Are you planning to add the same sound wave and auto position functions that the V4 soundboard has to the soundboard control for pc sound? Thanks
question
Cam Rip Daily Planet

Cam Rip Daily Planet

Ok here is the cam rip of @DJ Sures on Daily Planet
question

Ezb Configuration Control

Newbie to product. Question regarding message below. 1/12/2015 9:10 AM - Attempting connection on 192.168.1.1:23 1/12/2015 9:10 AM - Connected to 192.168.1.1:23 1/12/2015 9:10 AM - EZ-B reports EZ-B v4 OS 1/12/2015 9:10 AM - Welcome to EZ-B v4 Beta! 1/12/2015 9:10 AM - EZ-B v4 ID: 57-51-0-0-47-255-60-57-57-37-38-38 1/12/2015 9:10 AM - Connected...
question
Dj On Daily Planet

Dj On Daily Planet

It took me some time to find a link to the Daily Planet show that @DJ is on Here it is for all that wish to see it DJ starts at about 31 minutes in DJ on the Daily Planet
question

Turns When Walking Forward

I have build six as the builder shows and ran the servos outside of the mounting joints to ensure everything was set correctly. Six tends to do two things, one of the servos seems to love to hum very loudly when the robot stops moving. Making to robot move once stops it for a while. I have taken the servos out of the mounts and reran the "all...
question
Ces 2015: Meet Sopo, The Ugly Paper Robot That Brings You Drinks?

Ces 2015: Meet Sopo, The Ugly Paper Robot That Brings You Drinks?

Gang, I'm all about supporting and encouraging innovation, but this was not ready for CES...
question

Jd Not Working Properly

Hello! I recently bought a JD ezrobot and I have been trying to make it work properly for a few days now. I built the robot twice already (with the motors facing the right way) and have connceted the wires, again, twice. I also calibrated the motors, as said in the calibrating lesson so basically I did every thing I could. Now, I have encountered a...
question

Initial Classes And Setting Up Servos - Last One (Grippers)

Working through the tutorials...the gripper one is confusing to me. The last tutorial on kinematic setup of the servos for the gripper...all others work as expected and are correct. Gripper servos set to 90 degrees (as instructed) fully opens both my grippers to fully open position. Instructions show fully closed and describe such. I can obviously...
question

Can We Use Our Wii U Gamepad For Anything?

Hello, We just ordered an Ar Parrot Drone so we're excited to connect it to ARC software and begin programming it, but we're wondering if it's possible to also connect our wii u GamePad to ARC so we can view the video feed on the GamePad LCD. Our Wii U has been collecting dust since we got the PS4, the only part of wii u that's cool is the GamePad...