Robot Building Questions
Join the ARC Pro community and gain access to a wealth of resources and support, ensuring your robot's success.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Prevents a PC from entering sleep mode via a tiny, resizable control-keeps the system awake while minimizing UI real estate
Featured
Project Gizmo robot build converting a kitty igloo into multi-deck robot with motors, casters, threaded-rod decks and developing robotic arm.
question
Dj On Daily Planet
It took me some time to find a link to the Daily Planet show that @DJ is on Here it is for all that wish to see it DJ starts at about 31 minutes in DJ on the Daily Planet
8
3 k
Wolfie |
question
Turns When Walking Forward
I have build six as the builder shows and ran the servos outside of the mounting joints to ensure everything was set correctly. Six tends to do two things, one of the servos seems to love to hum very loudly when the robot stops moving. Making to robot move once stops it for a while. I have taken the servos out of the mounts and reran the "all...
26
6 k
jfew |
question
Ces 2015: Meet Sopo, The Ugly Paper Robot That Brings You Drinks?
Gang, I'm all about supporting and encouraging innovation, but this was not ready for CES...
9
3 k
RoboHappy |
question
Jd Not Working Properly
Hello! I recently bought a JD ezrobot and I have been trying to make it work properly for a few days now. I built the robot twice already (with the motors facing the right way) and have connceted the wires, again, twice. I also calibrated the motors, as said in the calibrating lesson so basically I did every thing I could. Now, I have encountered a...
4
2 k
Andru |
question
Initial Classes And Setting Up Servos - Last One (Grippers)
Working through the tutorials...the gripper one is confusing to me. The last tutorial on kinematic setup of the servos for the gripper...all others work as expected and are correct. Gripper servos set to 90 degrees (as instructed) fully opens both my grippers to fully open position. Instructions show fully closed and describe such. I can obviously...
8
3 k
DJ Sures |
question
Can We Use Our Wii U Gamepad For Anything?
Hello, We just ordered an Ar Parrot Drone so we're excited to connect it to ARC software and begin programming it, but we're wondering if it's possible to also connect our wii u GamePad to ARC so we can view the video feed on the GamePad LCD. Our Wii U has been collecting dust since we got the PS4, the only part of wii u that's cool is the GamePad...
6
2 k
DJ Sures |
question
Connection Control Ip Input Not Working On Phone
Ever since I updated to the new version of the app on my android phone when I try to enter the IP address in the connection screen it does not work. When I type for example 192.168.3.2 what ends up in the control text box is 1921683.2 or some variation of that. Also the done button does nothing when pressed. The only way I can get back out of the...
2
3 k
Darathian |
question
Connecting Brookstone Rover To ARC Questions
Hi all, I am trying to connect my Rover v1 to ARC. I have tried two different ways: 1. Connect the rover to my wifi on the computer...
24
7 k
TOddDesignDenv… |
question
Full House At Ez-Robot Headquarters Today 1/9/2015
Looks like the whole team is together!
17
4 k
Dunning-Kruger |
question
Ez-Quadcopter, What Hardware?
Hi Guys, (Note: the following is quite summed up cause I had a long message typed out explaining in detail, but I unfortunately hit a wrong button and deleted...
16
6 k
CardboardHacke… |
question
How To Take A Pause At The End Pose?
i made some poses excample turn left so kd sees left and point the arm left. what am looking is that che stays 1 sec in this possition before posing ini.
5
3 k
Nomad 6R |
question
Ez Chronos 430-433 Or Ez Chronos 430-868 ?
dj whits one do you use?my pc became unstable and reboots itself. texas instru doesn support the 430-433 version no more
5
3 k
Nomad 6R |