Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Autonomous AI
Autonomous AI robot skill for ARC: vision-based LLM control, speech, movement, animations, memory,...
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Featured
Broadcast live audio and video from ARC camera to the web via HLS; cross-browser streaming. Requires router configuration for external access.
Featured
Don't try this at home!
question
Wireless Controlled Servos To Ez-B V4
I have two servos which cannot be hard wired directly to the EZ-B controller. They will be located about 10 feet from the EZ-B and I can't run...
18
6 k
RobertL184 |
question
Why Isn't My Servo Working
As the title says. It's an EZ robot micro lever servo. When I try to move it with a script or "H" or "V" servo control... Nothing. It's not released...
13
5 k
Steve G |
question
Learning Photography
We've hired a photographer to start taking photos of our products for the store. Now they need to be crisp and clear, so it's easy to see the parts. This is somewhat of a challenge...
6
3 k
Nomad 6R |
question
Lcd Display Help
Hey guys. I'm having a little trouble with an LCD display I recently purchased. I have read through some of the posts on the forum to help me get this going, but I need a little more help....
69
13 k
Steve G |
question
Ezbv4 Without A Case?
Hello to All My little one is doing well. I have gotten busy working and ran out of hands on time, so the project has slowed down, Soon I will try my hand at writing scripts for...
13
4 k
David mcsdaver |
question
Sound Recognition
While I have been setting up some new speech recognition commands, it got me thinking. Has anyone successfully integrated sound recognition with ARC? I found a sound recognition API while doing a Google see how on the subject, and as I don't have much experience with API's (non in fact) I was curious if anyone is using something like this with your...
7
3 k
CochranRobotic… |
question
Robot Eyes
Was doing a little web surfing a couple of weeks ago and ran into some pretty cool robot eyes. I ordered two 8x8 LED's and with my Arduino, programmed the chip to run them. Once the eyes are...
19
7 k
Shaunf |
question
Vertical And Horizontal Servo Control Movement Bug
After downloading the two recent updates I've come across something which I think may be a bug. When setting up or using...
19
5 k
Steve G |
question
Multiple Connections Question
Hi guys, I am trying to control three EZBs from one computer. I read some discussions and was directed into set a computer to adhoc mode and then manually connect...
2
2 k
mankental |
question
What Voltage Does Those 995 Servos Like?
I am guessing that they like 6 Volts. But, if you know the EXACT voltage that the 995 servos LOVE, let me know. Thanks in Advance! mel
10
3 k
MovieMaker |
question
New Supported Sensor Possibility? Capacitive Touch Sensor Breakout
CAP1188 - 8-KEY CAPACITIVE TOUCH SENSOR BREAKOUT - I2C OR SPI Hey EZ-Robot. Is this something you would consider adding to your new sensors? I know those building InMoov with V4's would love it. I am sure others would like it also.
11
5 k
thetechguru |
question
Can't Seem To Connect Ezb 3 Up With More Than 9600 Baud
I have finished most all of my main ports in Sally. But, it is running turtle slow. When it comes up and says connected, it is 9600 baud. I am running a W3 which has an I5 quad cpus and it should be faster than that. I have almost ALL of the ports filled up. I am not even running any scripts, just checking each port to see if it works. The graphix...
12
4 k
MovieMaker |