Robot Building Questions
With Synthiam ARC Pro, you're not just programming a robot; you're shaping the future of automation, one innovative idea at a time.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
I Make Robots Crew Socks
Exclusive to robot builders, these are a one-size-fits-all solution up to a men's size 12. The construction is 73%...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Balancing controller for Sainsmart v3 (and compatible) robots: PID tuning, real‑time telemetry, angle offset, movement and calibration via ARC.
Featured
Dewy, a tall robot built from RAD parts modeled after an Omnibot, showcasing teardown steps and rebuild photos.
question
Compatible Joypads With ARC
Hi everyone. I was playing around with a joypad I have (not the one in the picture) with ARC, and was trying to configure some buttons to control servos and 2 drive...
12
5 k
DJ Sures |
question
Sleep Mode?
Hi , I am wondering if anyone has been able to set any of the ez robots into sleep mode and wake them with voice? I'm trying to build surveillance functions into robot and sleeping with voice commands would be great to save battery power.
5
2 k
DJ Sures |
question
Flexible Manninque For Protocol Droids
I seen these two manninques a that I think would be perfect for creating a protocol droid here are some pictures of them and the links for them....
0
3 k
Linux robot 9… |
question
Latest Email With Updates To Training Links All Fail
FYI all the links in the last update Training email failed... all links are listed. confused https://tutorials/Lesson/60 https://community/Forum https://synthiam.com/User/Settings https://shop/ stress
6
2 k
DJ Sures |
question
Jd Not Connected But Cam Works
i think i have a spooky pc.jd is not connected but camera works.
4
3 k
Nomad 6R |
question
Inmoov Janitor?
Lol looks like the InMoov is a great floor buffer and mopper....
7
3 k
Linux robot 9… |
question
Question Regarding The Speed Of The Repeat Funtion In Ez-Script
I find that when using the Repeat function in EZ-Script it takes a long time to loop through...
10
4 k
DJ Sures |
question
Volt Regulator
are these to get for 3 volt also ?
31
6 k
Nomad 6R |
question
Nice Little Wifi Router For Robotics, Amazon Gold Box Deal Today
Due to the DHCP issue described here I set up my home network with a second WiFi router plugged into my primary router but using it's own SSID and a separate subnet that is only used by my robots. I found a nifty and inexpensive little TP-Link router that can run in multiple modes, and it is on sale for just $12.99 on Amazon today:...
2
3 k
thetechguru |
question
Audio Sound Location
Has anyone been able to use the voice sound to locate speaker. I want to make my robot look at who is talking. I know this may seem complicated but it seems to me you should be able to us two or more microphones to locate and run ezb script for movement.
5
3 k
Ellis |
question
Usefull For Ezbv4?
i found this on ebay.us.can this be usefull for the ezbv4? cable on/off swiths
4
3 k
Nomad 6R |
question
Signature Error On Adroid V4.1.2
Hello, I try to install the ez buider on my android V4.1.2 and I get a signature error, do someone know what to do ? Thx a lot
49
5 k
DJ Sures |