Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Arduino UNO wheel encoder: reads left/right ticks, provides counts, configurable ticks, wheel & pivot sizes, optional pose telemetry to ARC NMS.
Featured
Extend Roli's runtime for NMS experiments with a 7200mAh internal battery installed after a precise Dremel mod, boosting operation past 15 minutes
question
Connecting My Robot
I am trying to connect my JD robot through wifi for the first time. I have loaded the software and gone through the tutorials to this point. The only wifi that pops up is EZ-B EZES...
6
2 k
aes24 |
question
Humanoid Head With Camera & Rgb Eyes - What Additional Hardware?
I've just ordered a humanoid head for the purpose of creating a prototype interactive math...
10
4 k
MathProf |
question
Talking About Chipping
last pakkage was two dome and some small items.customs belgium 53 euro eek so now 5 pakkage are chipped.i need a coffin. blush
2
3 k
Nomad 6R |
question
No Answer From The Pc Speaker
Hello, today i work a little bit with the EZB Software. I make a new Project and i added 1x "Speech Recognition" and 1x "Speech Settings" I...
47
6 k
rentaprinta |
question
Shipping Time To Uk?
Hey, I finally got around to ordering my EZB this weekend (thanks to the 20% sale), so now my Hearoid can once again be brought to life (once I collect it from the guy I bought it off). Anyway, I was just wondering how long shipping takes to the UK?
11
4 k
Rich |
question
Ping Toymaker
Hey Tony, Just got those Bosch servos... thank you so much... Can I ask one more favour? What are the pin outs on these?... There appears to be 5 pins with a recessed sixth... I assume 2 are for...
17
5 k
Dave Schulpius |
question
Waitforchange Command Verses Goto Loop
I remember DJ commenting a few weeks ago that using the waitforchange command takes just a little bit more resources then a loop using a GoTo command. It seems that most proficient script writers here are under the impression that it's the other way around. I thought so too until I read DJ's comment. Did I misunderstand what DJ was saying and the...
19
5 k
WBS00001 |
question
Port D0
can you use only port D0 for callibrate your servo's?
5
3 k
Nomad 6R |
question
On/Off Switch
howmany amps is the on/off switch from jd? anyone knows this? THANKS
12
9 k
Nomad 6R |
question
Introduction - New Member
DJ recently reposted an older thread on etiquette for our discussion threads, and noted in that repost that new members should introduce themselves to the community. So here goes: I'm a university math prof who also has substantial teaching and research experience in CS/AI. My programming experience goes back to the punch card days (yes I am...
6
2 k
rb550f |
question
Help With Roborealm Saying Detected Objects
Hey guys. I need a little help with some script. As the title suggests, I'm trying to get an ARC script to speak an identified object...
39
7 k
Steve G |
question
Trying To Create Tracking Eyes Using Mobile Link
Is there anywhere that can show me a step by step process to create a tracking eyeball robot head with my iPad? I don't know...
10
3 k
Nomad 6R |