Robot Building Questions
Get access to the latest features and updates before they're released. You'll have everything that's needed to unleash your robot's potential!
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add remote telepresence capabilities to your robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Flip Flops
Robot building comfort is the name of the game. These personalized flip flops add some character to your robot building...
Featured
Stepper Servo
Control up to 127 stepper motors as servos with speed and acceleration.
Featured
Wall-e From Czech Republic
The first real but not main reason for Wall-E construction was that my son loves movie Wall-E and the second one was that I lost my son...
question
Ez-Robot T-Shirts
Its likely news to only a few of you that our own @bhouston has been selling EZ-Robot branded T-Shirts, but for the rest I wanted to offer a bit of a review Im been wearing my EZ-Robot...
15
4 k
Future Ez Robo… |
question
Sound Servo (Ezb)
When I use the Sound Servo (EZB) to control Mouth LEDs on my bot Wilber, The Sound Servo seems to quit outputting values before the spoken message is over. Notice 2015 is not included....
12
4 k
Steve G |
question
Jd On Tv. ( Izombie)
Hello EZRobot fans, I am sitting here watching the current episode of iZombie (season 2 episode 10, and there is a section where one of hte main characters has a JD dancing on his...
2
5 k
DJ Sures |
question
Defective Servo
One of my servos is overheating on my newly purchased EZ 6 Hexapod. I can smell the heat and see smoke coming from the part. How can I go about getting a replacement?
1
2 k
DJ Sures |
question
Common Questions For Reporting Questions
I just created some trouble reporting forms to use with the call center agents at work when they report problems to my team because we always need to go back to them and ask questions to clarify what the issue is. I see the same thing happen here all the time where someone will write a post tjat x doesnt work or y crashes and we always need more...
18
4 k
Steve G |
question
Is It Possible To Ramp Up And Down The Brightness Of Leds?
No lucking finding a post on this. I am working on a BB-8 driod with the EZ-Robot and am looking to get LEDs to quickly ramp to full brightness and fade out the same way (as opposed to just turn on or off.) Any ideas on the best way to achieve this? Thanks, Bob
7
3 k
Science Bob |
question
Chuckbot
Hi guys, Just a quick look at my first attempt, I call him Chuckbot. He still needs arms but he runs great. I have him geared up with voice recognition, joystick and collision avoidance. His shell is made...
3
2 k
DJ Sures |
question
Ezb Camera
Why would EZB sell a camera that is not focused? Then have a learn section that explains how to focus? Because of this I have broken my new camera that cost 59.00 and will not be in warranty. @DJ, can...
6
2 k
DJ Sures |
question
Script To Refresh Joystick
is there a command i can put in script to refresh the joystick ez panel as opposed to clicking the refresh button in the ez joystick window?
9
3 k
Jayutmb |
question
Sabertooth 2X25 And Ez-B V4 Simply Serial Connection
I have received my very first Sabertooth 2x25 motor controller today, and looking to hook it up over the weekend....
15
7 k
Steve G |
question
Ultrasound, Ping And Object Avoidancec On The Ezb-V3
Richard, would you know what script the Object Avoidance was for the v3. I have One PING unit with One sharp IR. . thats it. I just want to find that little algorythm. I used to know this site like the palm of my hand. But, I have forgotten a lot in the last many years. I am down to one robot, Sally. I finally scraped up enough to get some eyes. I...
19
4 k
Dunning-Kruger |
question
Obvious - Dumb Question - 7.4V Lipo Pack - But Most Servos Including Ez-Servos R
I am going to ask a question that has been gnawing at the back of my head. I have searched around and I see yess and nos. If a Servo is one of the many servos that gives you a torque at 4.8v and 6.0v And the EZBV4 pins are unregulated. Does the LiPo powering the EZBV4 mean that I need to only look for 7.4v servos?
5
2 k
Dunning-Kruger |