Robot Building Questions
Don't limit your robot's potential – subscribe to ARC Pro and transform it into a dynamic, intelligent machine.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add remote telepresence capabilities to your robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Men's High-top Sneakers
Cyborg fashion sense has no limits! These extremely comfortable high-top canvas sneakers are made to last and to impress...
Featured
Inverse Kinematic Arm
Move any robot arm with inverse kinematics in 3d cartesian coordinates.
Featured
The Real Wall-E
Its been a very crazy past few weeks. I took a day off today. Yes! I admit it. I took a day off... And I built a robot Felt great to be back...
question
Video Recording From Ezb Camera
I have a JD bot. I cant seem to save recordings from the ezb camera. According to the log there is no write access to the AVI file. Ive tried different save...
3
2 k
larschrjensen |
question
Camera Dongle Brocken
Just purchased an ez robot kit. Lots of fun and great learning tool for my son. We dropped the laptop and the video USB dongle broke into 2 pieces. Can we use any USB dongle or do we need to purchase one from the EZ robot store. If the later is the case can we purchase the USB dongle seperately? Thanks
2
2 k
DJ Sures |
question
Using Dragon Naturally Speaking With ARC
This has been brought up before is some threads, but has come up again recently. I promised that I would make a post about this so, here it goes... There have been some posts where people have asked to be able to use Dragon Naturally Speaking (DNS) with ARC. To do this, there would have to be a separate application installed which would handle this...
101
13 k
lizpoir |
question
Phraseshow / Phrasehide
Do we have any movement on the Phraseshow / Phrasehide issue or has the command been depreciated? Its just that I use it a lot in my projects and was just wondering. - Tameion
3
3 k
DJ Sures |
question
Httpget - Site Not Available Error
Is there a way to trap the error message when you do an HTTPGET and the site is not available. Right now, if it cant get to the site it errors out and halts the script. I would like to just trap the error and keep the script running. is that possible?
4
2 k
DJ Sures |
question
A Lotiny Blitz
Oh yeah! It was like lightning Everybody was fighting And the music was soothing And they all started grooving Yeah, yeah, yeah-yeah-yeah And the man in the back said everyone attack And it turned into a LoTiny blitz YA! Just ordered two!
14
4 k
Dave Schulpius |
question
Designing With Stepper Motors
Hi Everyone, I was wondering your thoughts on using an EZB-V4 to drive a stepper motor such as the one attached. Stepper Motor link...
20
6 k
Quantumsheep |
question
Ez-B V4/2 Comm Upgrade Boards
My two V4/2 Comm Upgrade boards have just been delivered, please note they were packed up in a LiPo Balance charger box. At first I thought I got sent the wrong...
8
3 k
faengelm |
question
Usb Connectio
Direct USB connection has been discussed in the past. Will both the EZB-4/2 and the Io Tiny be able to connect directly to a computer thru USB in the future? Will additional hardware be needed if it does happen, or will onboard ports allow communication?
0
2 k
Andy Roid |
question
Ezb Controller Disconnects With Error
My EZB controller keeps disconnecting after a couple of minutes and issues the message below, any ideas as to the problem? Comm Err: System.IO.IOException: Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed...
13
3 k
DJ Sures |
question
I Need Something 3D Printed
Ive asked a few people to 3D print these parts for me but the are taking to long to reply. So Im not sure if theyll print it or not and i need these parts urgently ....
28
8 k
GarryL |
question
Adventure Robot Checkout
Hello, I assembled the Adventure Robot and have it working with the RGB Animation Display and the Ultrasonic Sensor. All seems to be working for the most part but I have a...
56
7 k
DJ Sures |