Robot Building Questions
Take control of your robot's destiny by subscribing to Synthiam ARC Pro, and watch it evolve into a versatile and responsive machine.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Sticker
People know your robot is capable when they see it is powered by Synthiam. These stickers are heavy duty for both indoor...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Control Kondo KRS ICS2/3.5 servos via EZ-B UART; experimental, untested. Supports chaining, virtual servo ports, Release() and Servo() commands.
Featured
Charge hobby batteries safely inside a repurposed GE microwave with EZ-B voltage and temperature monitoring and automatic fault/overtemp shutdown
question
When Will Mobile Ultrasonic Radar Scan Be Updated?
just wondering about the Ultrasonic scanner available on windows ARC but for mobile it always says not yet supported. Will this be added to mobile app? As it would make the mobile scripting and Blockly much faster to program and the radar scanner graphic would be a big help to see if the sensors are actually pinging. I am currently using script the...
9
3 k
robo rad |
question
Sparkfun Micro Oled Breakout
Just purchased some ez robot kits and have installed ARC to my Laptop. I am looking to install a SparkFun Micro OLED Breakout module to my ezb controller. Add can find no add-on under the iC2 modules and wondered if any one tried to use this display module. It is 3.3v and uses the iC2 bus? Maybe someone will design a new control. I work with...
1
3 k
Jeremie |
question
Servos Not Responding To Fine Tune Profile Calibration
Two of the servos in JD will not respond when I try the Fine Tune calibration. I have checked the connections to...
3
2 k
DJ Sures |
question
ARC Stops Working
i did averthing like in the video.but i get an error,dont know what it is. need help.what does this mean?
42
7 k
Nomad 6R |
question
Ping Navigation Plugin
Hey everyone, For the last 4 weeks I've been working on my own navigation plugin, that uses ping sensors for it's distance sensing and I ran in to a few problems... Mainly that...
34
9 k
budel0 |
question
Microsoft Cognitive Computer Vision
every time I try to start the Microsoft Cognitive Computer Vision it crashes the ezb program! and it will not save the info that I put in ( have to recreate it each timeI reboot) was getting the ezb for my school bad advice?
3
3 k
DJ Sures |
question
Elastic Band Shooter On Six-Can It Be Used In Roboscratch?
Our 4th, 5th & 6th grade High Ability Leaner (HAL) kids have downloaded and played with the elastic band shooter App on our Six. They have set up an obstacle course and would like to shoot a target as part of the course but we can only see how to make it shoot from the main screen. The servos aren't recognized in RoboScratch when they go to add...
4
2 k
gcschools |
question
Posting My Projects On Ez-Robot.Com
Hi, Happy to have joined theEz robot community! I would like to share some film and photos of my projects but it is not very clear to me which is the best way to do this.. https://www.ez-robot.com/User/Projects thanks for your time, greetz, Seth
3
2 k
Buratino |
question
Raspberry Pi 3 Ezb Sdk Help
Hi All, As I follow the RPi SDK instructions below, when it get the command: sudo gacutil -i EZ_B.dll https://www.ez-robot.com/EZ-Builder/mono The Pi counsel reads: Failure adding assembly EZ_B.dll to the cache: The system cannot find the file specified. I didn't see where in the instructions where I could get the dll. I've searched the site for a...
2
3 k
EEGbiofeedback |
question
4-In-1 Sensor Questions
I am attempting to get a 4-in-1 sensor to work as I need it to and not have much success - I need a hand. I am trying to get the 4- in-1 sensor to drive 2 servos to keep...
22
6 k
DJ Sures |
question
Control Ezb From Mobile
Hi I would like to know if it s possible to use app mobile to control ezb from my iphone without using wifi.? I would like to use web browser( app mobile) from my iphone to...
30
5 k
christophemaur… |
question
Looking For Ifttt Plugin Testers
I just completed my first plugin and I'm looking for testers synthiam.com/uploads/Plugins/192/68f20522-4565-4c7a-8da3-b55209349260.ezplugin This plugin...
7
3 k
Mickey666Maus |