Robot Building Questions
Unleash your creativity with the power of easy robot programming using Synthiam ARC Pro
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add remote telepresence capabilities to your robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Gaming Mouse Pad
While programming your robot, these 9x7 inch personalized mouse pads deliver a smooth experience with a custom flair....
Featured
DepthSensor
Use Microsoft Kinect, Kinect One, or Asus Xtion Pro to move servos from your body joints.
Featured
Well Its A . Start
Hello all I got my kit the other day and just started to play with it today and yes when it came in i did hook a servo up just to see if it...
question
Led Fade
I am trying to get the PWM going to fade an LED on my IOTiny, but it doesnt seem to be working. I have an IOTiny with 2 servos and camera. I am trying to get an LED to fade on and then off (repeatedly). I...
12
4 k
spurgco |
question
ARC Error At Loading Of Ippsp Libarary?
After update today causing error, ARC starts OK but as soon as I select a project or Add an item (Camera causes the error when selected), I get the following error: Error Title: Error at loading of ippSP library Error Comment: No DLLs were found in Waterfall procedure. After error flashes ARC freezes and then closes Worked fine prior update....
2
3 k
Rob_C |
question
Robot Volume
Wondering what people do if they want louder volume on their robot? I had some students record their voices, but when they added movements, the sound of the servos overpowered their grade 2 voice...
4
2 k
DJ Sures |
question
Dynamixel Communication
Hello, I am slightly confused about which protocol is needed to run dynamixel servos. I purchased a few ax12 a servos for lower strength applications, but Im also interested in an mx 64 t or 64 r which appears to be either ttl or rs 485 protocols. Which protocol does port d5 on the ezb 4 use. I read some posts from old bit builder , he was using ax...
10
4 k
Jerseylance |
question
Image Overlay On Twitter Image
ok, i cant seem to find what i am missing.. I have setup the camera with motion and face tracking. I have added overlays on the camera config, and linked it up...
1
2 k
DJ Sures |
question
New Dynamic Speed When Turning Does Not Work For Roomba Controls
When using the Roomba control panel, the new Dynamic Tracking Speed (spelled Speen btw on...
3
3 k
DJ Sures |
question
Motor Controller For 24V Dc Motor
Ive been reading up and not quite sure which is correct for me, sabertooth, kangaroo, hbridges, and that easily work with the ez-b. It seems there are a...
12
6 k
Bravia |
question
4-In-1 Orientation Sensor Coming Soon?
Confused... I have four 4-in-1 Orientation Sensor that match, exactly, the PCB depicted in the DYI picture marked coming soon. I dont find this...
8
3 k
Doron |
question
Auto Position Action In Random Modus
Dear EZ-Robot Team and Fans, If my camera notice something.. I want to play an action from auto position.. but not every time the same.. I want a...
2
2 k
Asimo |
question
Am Confused Making Ed Mech-Jd
am making a new ez robot.the ed mech chooter but with an jd styl. as am looking the config how to build it,i see diff asigments from ports. one says d0 is left...
5
2 k
DJ Sures |
question
Camera Movement With A Continuous Servo
In my R2 build I put the camera with a 180 servo that controls the up and down in the radar eye. Im using a continuous spin servo to spin the dome and would like the camera to control that servo for side to side tracking, but in settings it appears that it has setup for a 180 degree servo. I tried the min/max with the continuous spin servo but it...
7
3 k
DJ Sures |
question
Raspberry Pi
will this work with ez http://www.raspberrypi.org/faqs
10
5 k
jstarne1 |